Pletscher ESGE Comp Zoom 40 Adjustable Propstand
£25.99
was
Colour
£25.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Your bike will need a suitable pre-fitted mounting point to use this stand.
- For bikes with 40 mm 2 bolt fitment
- Fits wheel size 26? & 28? (700c) wheel
- Rear support
- Rotational movement of compression spring
- Cushioning of the strut
- Endurance folding mechanism
- Adjustable length in 7.5 mm intervals
- Aluminium die casting GD-ALSi9Cu3
- Powder coating black / metallic silver
- Plastic foot with a large contact area
- Zinc-plated steel pin
- Mounting screw: M5
- Length overall 40cm
- Max leg / strut length 34cm
- Weight: 276g
- Maximum load including bicycle 18kg
- For bikes with 40 mm 2 bolt fitment
- Fits wheel size 26? & 28? (700c) wheel
- Rear support
- Rotational movement of compression spring
- Cushioning of the strut
- Endurance folding mechanism
- Adjustable length in 7.5 mm intervals
- Aluminium die casting GD-ALSi9Cu3
- Powder coating black / metallic silver
- Plastic foot with a large contact area
- Zinc-plated steel pin
- Mounting screw: M5
- Length overall 40cm
- Max leg / strut length 34cm
- Weight: 276g
- Maximum load including bicycle 18kg
Specification
Downloads
Download File
Questions & Answers (2)
Will This Stand Fit A Raleigh Motus
By Mr Roger Nice
22 Jun 2016
What review
SJS Customer Service:
Hi,
As we don't stock your bike we're not aware what the exact fittings for a propstand are on it I'm afraid. If your bike has two bolt holes on the inside of the chainstays that are 40mm apart then this stand should be able to fit.
Thanks.
As we don't stock your bike we're not aware what the exact fittings for a propstand are on it I'm afraid. If your bike has two bolt holes on the inside of the chainstays that are 40mm apart then this stand should be able to fit.
Thanks.
Will This Stand Fit The Pendleton Somerby Bike.
By Steve Oakley
01 Sep 2014
Will this bracket fit the Pendleton Somerby bike using the mounting on the frame. if not, is there a bike stand that you can suggest.
many thanks
many thanks
SJS Customer Service:
Hi,
Unfortunately not, this stand uses an inside mount fitting where as you require an 40mm outside fitting for your bike. The only one we're aware as being made in this fitting is the Procraft Kick II SJSC part number 28770.
Thanks.
Unfortunately not, this stand uses an inside mount fitting where as you require an 40mm outside fitting for your bike. The only one we're aware as being made in this fitting is the Procraft Kick II SJSC part number 28770.
Thanks.