Thorn Accessory Bar MK1 T Shaped 105 mm Extension - 22.2 mm - Black Anodized

I recommend this product

These are incredibly useful for all manner of gadgets and extras when cockpit space is limited (ebike computer, phone, lights etc). I am using these on my Surly Straggler drop bar with one below for Rohloff shifter and one above for gadgets. The upper one allows me space to run lights etc above an Ortlieb bar bag. Love it so much that I also use one on my Surly 29 and Pugsley fat bikes. If ever there was a reason not to trim a steerer tube, it’s these! Spacers between bar stem and these is a must for clearance etc so the more steerer tube the better!

I recommend this product

Used on a eMTB to carry a Carradice zipped roll bag and Topeak Mountain Morph pump. Great improvement over fixing them directly to the bars. Dropper posts limit under saddle solutions and l don’t want a backpack so this has been the answer to a problem with few options.

I recommend this product

It fits pretty well on my bike! The only thing is you have to be careful with your cables when installing it.

I recommend this product

This is listed as having an angle of '0 degrees', by which they do NOT mean perpendicular to the steering column (which is what I had assumed because that is the more common convention with stem labeling these days), but they actually mean parallel with the ground on a bike with a head tube angle of 73 degrees. It would more commonly be called a plus/minus 17 degree angle. This was good news for me because putting it at a 17 degree downwards angle gave me lots more room than I had been expecting, so I can mount aerobars to my regular bars (for a comfortable additional hand/arm position when touring) and still have a handlebar bag mounted below them on this mount which I can clip on and off without a problem.

I recommend this product

Excellent quality, beautiful TIG welding. Amazingly quick delivery to USA. I'll be using this to mount my Arkel handlebar bag, freeing up space on the handlebar for a headlamp.

I recommend this product

This is a well made and finished piece of kit, bought so that I could use 26.2 mm accessories with my 31.8 mm handlebar set up. I don't run with a lot of spacers and when first offered up to my steerer tube, it fouled the front cantilever cable stop, also mounted on the head tube. It also has the same rise as my stem so fits only just underneath the handlebars. IT WILL BE MADE TO FIT, I'll just have to adjust the brake cable run to avoid fouling. My excess accessories are an airzound horn and lights which can be mounted beneath the bar.
For the record, I'm tall with long arms and like a low handlebar, all factors that make fitting this on my bike more of a challenge. If you run with a good few spacers between your handlebar stem and headset it should fit really easily.

I recommend this product

This is a well made and finished piece of kit, bought so that I could use 26.2 mm accessories with my 31.8 mm handlebar set up. I don't run with a lot of spacers and when first offered up to my steerer tube, it fouled the front cantilever cable stop, also mounted on the head tube. It also has the same rise as my stem so fits only just underneath the handlebars. IT WILL BE MADE TO FIT, I'll just have to adjust the brake cable run to avoid fouling. My excess accessories are an airzound horn and lights which can be mounted beneath the bar.
For the record, I'm tall with long arms and like a low handlebar, all factors that make fitting this on my bike more of a challenge. If you run with a good few spacers between your handlebar stem and headset it should fit really easily.

I recommend this product

A well made quality component that make mounting a bar bag easier.

I recommend this product

A well made & simple solution to the perpetual question...
"How can I fit all this junk to my handlebars?"
Much better looking & stronger than other, bolt on brackets too.

I recommend this product

A simple, robust solution to vexing problems at a reasonable price. Now allows the installation of Paul Engineering Cross Levers with the Orblieb handlebar bag. Buys back valuable handlebar real estate for computers, lights, bells and gadgets of all sorts.
Quality and ease of installation is far better than the Minoura Swing Grip.

I recommend this product

Nice high quality product. I had bought the shorter one but would occasionally bump my knee on the end of it when I stood to climb. So I purchased the longer (105 mm) unit and it places the cross bar just about directly under my drop bars. I have mounted Paul"Thumbies" ( Thumb shifter adaptors for Shimano bar end shifters) on it to free up real estate on the bars of my touring bike. And therein lies the rub. Road bar diameter of 26. some mm and accessory bar diameter of 22.some mm. No fault of the product by any means but if shims were made available for fitting road bar sized accessories on the T bar it would simplify the process of adding such items and increase the usefulness of this product. Thank you.

I recommend this product

Works perfectly with enough steerer tube space. I've thought about getting one for ages ( years) should have done it before.

I recommend this product

I was trying to solve a problem with an Ortlieb handlebar bag sitting too high and it blocked my handlebar lights. I purchased the Thorn to fix this problem. Unfortunately the bag still sits too high and the lights are still blocked. It didn't fix my problem but that doesn't mean it isn't a great product. For someone else this product could be the ticket. It does free up additional handlebar real estate. It does it what it is suppose to do.

Installation was easy and the product is made well enough. I just wished it fixed my problem.

I recommend this product

Well made, easy to fit, does what it says - can ride in the dark now with the handlebar bag on.

Simple, straightforward and robust, perfect for mounting additional lights to a bike, particularly road bikes where bar space is at a premium and probably already occupied by a computer, this will allow mounting of perhaps 2 lights (e.g. edelux on a electron mount) as well as a reflector. A mystery to me why more manufacturers dont make this kin of product.