Call us on 01278 441500 [email protected]
Home > Transmission > Chainsets > Chainsets - Shimano Spares

Shimano Dura-Ace FC-7800 Ring - Y1F316000

Customer Reviews (1)
4 / 5| Write your review
£2.99
was
View supersize image  
£2.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Shimano Dura-Ace FC-7800 10 speed chainset Ring.

The following are an "A" match which indicates that the parts are the same in materials, appearance, finish & size etc.

Road / Gravel
- Shimano Dura-Ace FC-R9100-P / FC-R9100 / FC-9000 / FC-7950 / FC-7900 / FC-7803 / FC-7800-C
- Shimano Ultegra FC-R8000 / FC-6800 / FC-6750 / FC-6703 / FC-6700 / FC-6650-S / FC-6650-G / FC-6604-G / FC-6603-A / FC-6603 / FC-6601-G / FC-6600-A / FC-6600
- Shimano 105 FC-R7100 / FC-R7000 / FC-5800 / FC-5750 / FC-5703 / FC-5700 / FC-5650 / FC-5603 / FC-5600
- Shimano Tiagra FC-4703 / FC-4700 / FC-4650 / FC-4603 / FC-4600 / FC-4550-CG / FC-4550 / FC-4503 / FC-4500
- Shimano Sora FC-R3030 / FC-R3000 / FC-3550 / FC-3503 / FC-3450 / FC-3403
- Shimano Claris FC-R2030 / FC-R2000
- Shimano FC-CX70 / FC-CX50
- Shimano GRX FC-RX820-1 / FC-RX820-2 / FC-RX810-11-1-LE / FC-RX810-11-2-LE / FC-RX810-11-1 / FC-RX810-11-2
- Shimano GRX FC-RX610-1 / FC-RX610-2 / FC-RX600-1 / FC-RX600-11 / FC-RX600-10
- Shimano FC-RS520 / FC-RS510 / FC-RS500 / FC-RS400
- Shimano FC-R700 / FC-R603 / FC-R601 / FC-R600 / FC-R565 / FC-R563 / FC-R553 / FC-R550 / FC-R460 / FC-R350
- Shimano Alfine FC-S501 / FC-S500
- Shimano Metrea FC-U5000-1 / FC-U5000-2

MTB
- Shimano XTR FC-M9130-1 / FC-M9125-1 / FC-M9120-1 / FC-M9120-B2 / FC-M9100-1 / FC-M9100-2 / FC-M9020-B1 / FC-M9020-B2 / FC-M9020 / FC-M9000-1 / FC-M9000-2 / FC-M985 / FC-M980 / FC-M970 / FC-M960
- Shimano Saint FC-M825 / FC-M820 / FC-M815-1 / FC-M815-2 / FC-M810 / FC-M810-2 / FC-M805 / FC-M800
- Shimano Deore XT FC-M8130-1 / FC-M8120-1 / FC-M8120-B2 / FC-M8100-1 / FC-M8100-2 / FC-M8000-B1 / FC-M8000-B2 / FC-M8000 / FC-M785 / FC-M782 / FC-M780 / FC-M771-K / FC-M770-10 / FC-M770-9 / FC-M761 / FC-M760 / FC-T8000 / FC-T781 / FC-T780
- Shimano SLX FC-M7130-1 / FC-M7120-1 / FC-M7120-B2 / FC-M7100-1 / FC-M7100-2 / FC-M7000-B1 / FC-M7000-B2 / FC-M7000 / FC-M677 / FC-M675 / FC-M672 / FC-M670 / FC-M665 / FC-M660-10 / FC-M660-9
- Shimano ZEE FC-M645 / FC-M640
- Shimano Deore FC-M6130-1 / FC-M6120-1 / FC-M6100-1 / FC-M6000-B2 / FC-M6000-2 / FC-M6000 / FC-M617-B2 / FC-M617 / FC-M615 / FC-M612 / FC-M610 / FC-M5100-1 / FC-M5100-B2 / FC-M5100-2 / FC-M591 / FC-M590-10 / FC-M590-9 / FC-M533-K / FC-M532 / FC-M4100-B2 / FC-M4100-2 / FC-T6010 / FC-T611
- Shimano FC-M627-B / FC-M627 / FC-M625 / FC-M622
- Shimano Hone FC-M601-2 / FC-M600-3
- Shimano Deore LX FC-M583-K / FC-M582 / FC-M581 / FC-M580 / FC-T671 / FC-T661
- Shimano FC-M552 / FC-M545 / FC-M543-K / FC-M542
- Shimano Alivio FC-M4060 / FC-M4050-B2 / FC-M4050 / FC-T4060
- Shimano DXR FC-MX71 / FC-MX70
- Shimano FC-MT700-B2 / FC-MT700-2
- Shimano FC-MT611-1 / FC-MT610-1 / FC-MT610-B2 / FC-MT610-2 / FC-MT600-B2 / FC-MT600-2
- Shimano FC-MT512-1 / FC-MT511-1 / FC-MT510-1 / FC-MT500-B2 / FC-MT500-2 / FC-MT500-3
- Shimano FC-MT300-3
- Shimano FC-MT210-B2 / FC-MT210-2 / FC-MT210-3 / FC-MT200-3
- Shimano FC-T551
- Shimano CUES FC-U8000-1 / FC-U8000-2 / FC-U6010-2 / FC-U6000-1 / FC-U6000-2B / FC-U6000-2 / FC-U4010-2B / FC-U4010-2

Genuine Shimano replacement part.

Note: Scrolling down the page will take you to the associated parts related to this chainset & their availability
Product Reviews (1)
Questions & Answers (17) Q & A
Specification
Downloads
Download File  
Associated Components
Part Number
Description
Availability
 
Y1F308000
Crank Arm Fixing Bolt
Discontinued
Y1F398050
Gear Fixing Bolt (M8 x 9.1) & Nut (5 sets)
Discontinued
Y1F339000
Chainring 39T (B-Type)
Discontinued
Y1F342000
Chainring 42T (A-Type)
Discontinued
Y1F344000
Chainring 44T (E-Type: for TT/ TA)
Discontinued
Y1F398010
Chainring 50T (B-Type)
Discontinued
Y1F398020
Chainring 52T (B-Type)
Discontinued
Y1F398030
Chainring 53T (B-Type)
Discontinued
Y1F398040
Chainring 53T (A-Type)
Discontinued
Y1F398250
Chainring 54T (A-Type: for TT/ TA)
Discontinued
Y1F398260
Chainring 55T (A-Type: for TT/ TA)
Discontinued
Y1F398270
Chainring 56T (E-Type: for TT/ TA)
Discontinued
Y1G598010
Left Hand Crank Arm 165 mm
Available to order
Y1G598020
Left Hand Crank Arm 167.5 mm
Available to order
Y1G598030
Left Hand Crank Arm 170 mm
Available to order
Y1G598040
Left Hand Crank Arm 172.5 mm
Available to order
Y1G598050
Left Hand Crank Arm 175 mm
Available to order
Y1G598060
Left Hand Crank Arm 177.5 mm
Available to order
Y1G598070
Left Hand Crank Arm 180 mm
Available to order
Y1F398200
Left Hand Adapter (B.C.1.37" x 24T) English Thread
Available to order
Y1F398210
Left Hand Adapter (M36 x 24T) Italian Thread
Available to order
Y1F398220
Inner Cover & O-Ring
Discontinued
Y1F398230
Right Hand Adapter (B.C.1.37" x 24T) English Thread
Available to order
Y1F398240
Right Hand Adapter (M36 x 24T) Italian Thread
Available to order
Product Reviews (1)
Overall Product Rating 4 / 5
Stopped a knocking sound
By Neil
21 Sep 2023
4 / 5
I recommend this product
Seems ridiculously overpriced for a single washer, but that's not SJS's fault. They are covered in rubber, and have a protruding bit that slots into the hub. Fitting them stopped my cranks from 'knocking' on every rotation. I fitted these to a second-hand FSA crankset that looked like it had similar washers in the manual. Couldn't buy the correct FSA ones, but these did the job.
Questions & Answers (17)
Does this fit tigrea hollowtech 2
By
19 Aug 2023
Hello & thank you for your enquiry.
Yes part number 24989 will for Shimano Tiagra Hollotech 2.
Kind regards, pc 21/8/23.
Do I need these for SM-BB93 and FC-MT210-3
By
23 May 2023
I have just installed a SM-BB93 and FC-MT210-3 they did not come with this ring. Do I need to fit them?
Hello and thank you for your enquiry.
I have reviewed your question with our technical team & Shimano manuals, the Axle Ring is pre fitted in the crank arm. Please can you check this is the case in your situation. If missing or damaged, then Axle Ring part number 24989 will be required.
Hope this helps.
Kind regards. PC 24/5/23.
Can I use this/these on a Shimano 105 FC-RS510 crankset? Many thanks
By
22 Apr 2023
Hi
Thank you for your enquiry, yes this is the correct axle ring to be used on your FC-RS510 crankset.
Kind Regards. JP 24/04/23
Which way round does the ring go? One side is bare metal - the other black plastic.
By
10 Feb 2023
Does the metal side go next to the crank, or next to the BB?
Thanks.
The plastic side must be orientated towards the bearing, the metal side to the crank arm. SK 16/02/23
Will these fit my FC M770 chainset .thanks
By
03 Feb 2023
Yes this will work with the FC M770 Chain set SK 03/02/23
Is this compatible with Tiagra FC-4700 crankset?
By
01 Aug 2022
Yes this will suit FC-4700,

JK 01.08.22
Can I use this with fc6800
By
13 Mar 2021
Thank you for your enquiry, yes it will fit fine.

WD 15/03/21
Hollowtech II crank arm.
By
23 Jan 2021
Is this the o-ring that inserts just inside the crank arm to form a seal against the bottom bracket? 24mm inner diameter, approx 27mm outer.
Yes, this o ring sits on the crank arm itself forming a seal against the BB. if you can let me know the FC code of your crankset I can confirm if this is the part you require.

Thanks 29.01.21
can i use this on my 6600 crankarm
By
29 Oct 2020
If so, is it for1 side or both
Thanks
Hello, yes this will work with the Ultegra FC-6600 crankset- you should use one of these each side of the BB.

Thanks

JK 30.10.20
Dura-Ace FC-9000 Crankset
By
26 May 2020
Hi, are these supposed to be fitted to both sides on an FC-9000 Crankset?
Took mine to pieces recently for cleaning and there was only one installed to the drive side yet the exploded view for FC-9000 seems to show one on both?
Thanks
Hi, yes one on each side. Thanks
Can I use this with an FC-5800?
By
25 Jan 2020
I seem to be missing these on my crank set. Is this normal? Would these be the right ones to buy to get it set up as per the exploded view of the FC-5800 crank arm?
Hi
Thank you for your enquiry, we can confirm that this is the correct Axle Ring for the 105 FC-5800 chainset & should be fitted as per Shimano instructions.
Kind Regards. 27/01/20
To be used with the R8000 crankset ?
By
24 Sep 2019
These are shown on the exploded diagram of the R8000 crankset , I presume they are recommended by both yourselves and Shimano? They actually came with my first R8000 groupset.
Yes, these are required as part of the chainset.

Thanks - 01/10/19
I need a ring that fits my non-drive side FC-600 crank arm. Would this be suitable? Thank you!
By
31 Mar 2019
Yes, this is the direct replacement.

thanks - 01/04/19
can i use this with FC-M590-10
By
09 Oct 2018
is this the spacer ring between bottom bracket and pedal arm?

also does this model need a grub screw that fits into hollow section and secures pedal arm
if it does do you sell them
This spacer sits on the crank axle, drive side, against the spider. The details for parts relating to the FC-M590-10 chainset are here - http://si.shimano.com/pdfs/ev/EV-FC-M590-10-3207B.pdf

Thanks - 09/10/18
Is this to be used in conjunction with the Shimaon 105 FC 5703 Triple?
By
15 Oct 2017
Hello,

This can indeed be used with the FC 5703.

Thanks.
Shimano Hollowtech O-Ring For Crank Shaft - Y1F316000
By
12 Jan 2017
Is this required to be fitted on Shimano 6800 cranks and bottom brackets - both sides?
Hi,

This is indeed recommended by Shimano to be fitted to both sides of your FC-6800 cranks.

Thanks.
This Part 1F3 16000 A Ring Is Not The Same As 1F3 1600 ?
By
09 Nov 2013
LOOKING TO BUY THE RING THAT FITS ON THE AXLE OF HOLLOWTEC 2 ALSO THE OTHER PART I NOT SURE I NEED BUT IT MIGHT BE NEEDED IS Shimano "6.5mm BB Spacer"
Bottom bracket spacers, Shimano Y1F913000 "6.5mm BB Spacer" THIS IS I THINK A PART FOR AN OLDER STYLE BUT MY COGS SEEM TOBE VERY VERY CLOSE TO THE FRAME SO I MIGHT WISH TO SPACE THEM THAT 6.5 MM
Hi,

This part does have the correct Shimano part number.
The part you are looking for is SJSC part number 17709.

Thanks.