Karasawa Screw on Tandem Drum Brake Replaces Arai
£49.99
was
£49.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Fits all tandem hubs with thread on the left hand side, opposite the freewheel. Supplied with clip on fitting for chainstay including cable stop and adjuster. If fitting this to a frame with a braze on stop it may be necesay to drill a fresh hole.108mm diameter drum, 850g. This brake is intended as an additional (third) brake for a tandem, acting on the hub to keep the rims cool while descending, please note that if used for long periods of time this brake will get very hot. When hot it's function will fade, when this occurs the tandem should be stopped using the rim brakes.
Hole size for axle 14mm, supplied with a spacer to reduce the axle diameter to 10mm.
Hole size for axle 14mm, supplied with a spacer to reduce the axle diameter to 10mm.
Specification
Downloads
Download File
Questions & Answers (8)
Can I use this with a Rohloff hub?
By Ferengii
20 Jun 2022
SJS Customer Service:
No, it will not as the hub has no provision to fit this brake.
JK 20.06.22
JK 20.06.22
Will it mount on a Sturmey SX-RB3 hub
By Pierrick
20 Oct 2019
On my bike, the rear Wheel comes with a band brake which is mounted on a sturmey archer hub (SX-RB3)
Is it possible to mount that karasawa drum brake instead of my band brake (end of life)
Best regards
Is it possible to mount that karasawa drum brake instead of my band brake (end of life)
Best regards
SJS Customer Service:
We are generally unable to confirm on part fitting compatibility unless we have fitted them bikes we do not produce/sell.
Thanks - 21/10/19
Thanks - 21/10/19
Can this be screwed to a six-bolt disc hub?
By Jon
29 Jun 2018
Just wondering if the two holes either side of the threaded centre of this hub will enable it to be screwed to a standard six-bolt disc hub (I can't find any info online on the spacing and diametre of these two holes).
SJS Customer Service:
No, this will not fit a 6 bolt disc hub.
Thanks
Thanks
Hub Compatibility
By Ian Smith
08 Jan 2017
Hi,
I have a Thorn Adventure purchased in 2005 with a 48 spoke rear wheel consisting a CR18 Rim and a Shimano hub identified as FH-HF08 and is threaded on the opposite side to the freewheel. Is this hub compatible with the Karasawa hub break and where is the third brake lever normally located. Thanks
I have a Thorn Adventure purchased in 2005 with a 48 spoke rear wheel consisting a CR18 Rim and a Shimano hub identified as FH-HF08 and is threaded on the opposite side to the freewheel. Is this hub compatible with the Karasawa hub break and where is the third brake lever normally located. Thanks
SJS Customer Service:
Hi,
This screw on drum brake uses the same thread as your hub so should fit fine. There a few different options for the brake lever, you can mount a 3rd lever to the main set of handlebars, the stoker can have a working brake lever or there is the option of using a cable splitter to allow one brake lever to operate two brakes.
Thanks.
This screw on drum brake uses the same thread as your hub so should fit fine. There a few different options for the brake lever, you can mount a 3rd lever to the main set of handlebars, the stoker can have a working brake lever or there is the option of using a cable splitter to allow one brake lever to operate two brakes.
Thanks.
Karasawa Servo 90 Brake
By Kevin
20 Nov 2016
Do you have a Safety Brake for my old Karasawa Servo 90 Brake. It's for my E-GO electric bike.
SJS Customer Service:
Hi,
This Karasawa drum brake is the only product from Karasawa we're able to get hold of I'm afraid.
Thanks.
This Karasawa drum brake is the only product from Karasawa we're able to get hold of I'm afraid.
Thanks.
Brake Activation
By Tim
23 Jun 2015
I'm new to the drum brakes, and have an older Santana (1989 Visa I think), that has the threading on the rear hub. I presume this will fit, but how do you activate the brake? Do I need a lever and cable kit?
SJS Customer Service:
Hi,
You will need to purchase a brake lever and cable to operate this brake. Drum brakes use the same cable pull as calliper and cantilever brakes so you will need a brake lever suited to one of those.
Thanks.
You will need to purchase a brake lever and cable to operate this brake. Drum brakes use the same cable pull as calliper and cantilever brakes so you will need a brake lever suited to one of those.
Thanks.
Will This Fit A Shimano Fh Hf05 Hub?
By Paul
15 Apr 2015
The existing Arai is giving me trouble. Will this fit the Shimano hub?
Thanks.
Paul
Thanks.
Paul
SJS Customer Service:
Hi,
This tandem drum brake fits to the same threads as an Arai would so this should fit your hub fine.
Thanks.
This tandem drum brake fits to the same threads as an Arai would so this should fit your hub fine.
Thanks.
How Is This Installed On The Wheel?
By Anonymous
25 Dec 2014
SJS Customer Service:
Hi,
It screws onto a hub specifically designed to accept a drum brake.
Thanks.
It screws onto a hub specifically designed to accept a drum brake.
Thanks.