Problem Solvers MisMatch 1.1 Adapters - Shimano I-Spec-B Brakes to SRAM MatchMaker Shifters - Pair
£42.99
was
£42.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Mountain component manufacturers design brake levers and shifters to be mounted to one clamp, saving on precious handlebar space, making adjustment easier and quicker, and just plain looking better. Usually, these only mate with the corresponding product from the same manufacturer, so Problem Solvers decided to mix 'em up. Problem Solvers' MisMatch Adapters allow you to mix 'n' match Shimano I-Spec and SRAM MatchMaker products.
Compatibility: SRAM Matchmaker Shifters / Shimano I-Spec B Brakes
Compatibility: SRAM Matchmaker Shifters / Shimano I-Spec B Brakes
Specification
Downloads
Download File
Questions & Answers (3)
I spec b versus I spec II
By David Law
06 Feb 2023
One of the previous questions asked whether these would work with Saint brakes (I-spec b) and AXS. Your response was that they work as long as they are I-spec II. Can you clarify that? Im not sure why they are labelled I-Spec B if the brakes have to be I spec II.
SJS Customer Service:
According to the compatibility chart these adapters allow Sram shifters, to be fitted to any Shimano brake that uses the I-Spec-B fitting.
Will these allow the AXS controllers to fit the Shimano Saint levers on both sides? Thanks
By Mark
20 Aug 2020
SJS Customer Service:
YES, providing that the saint levers are I-Spec 2 and you AXS shifters are of the SRAM matchmaker fitting type.
Will These Matchmakers Work With Shimano Zee Brakes And Sram X1 Levers?
By David
17 Nov 2016
SJS Customer Service:
Hi,
Providing your Zee brake levers are the I-Spec B versions then these Matchmaker clamps will the be the correct part you require. If you're unsure which levers you have on the back of the lever reservoir body there will be a code; either BL-M640 for the old type and BL-M640-B for the newer I-spec B levers.
Thanks.
Providing your Zee brake levers are the I-Spec B versions then these Matchmaker clamps will the be the correct part you require. If you're unsure which levers you have on the back of the lever reservoir body there will be a code; either BL-M640 for the old type and BL-M640-B for the newer I-spec B levers.
Thanks.