Thorn Tandem Crankset for X-Over Drive - Front
£29.99
was
Size
£29.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Takes 110 pcd chainring, needs 113mm bottom bracket
Specification
Downloads
Download File
Questions & Answers (5)
Will this replace a Deore tandem front crankset?
By Axel
29 Mar 2023
Hi,
We need to replace a Deore 38T Tandem front Crankset (tandem from around 1990 ??). Specs from your Set seem right but can you confirm your set could replace the Deore set?
What's the cost for shipping to Germany and how long would it take approximately?
Regards
Axel
We need to replace a Deore 38T Tandem front Crankset (tandem from around 1990 ??). Specs from your Set seem right but can you confirm your set could replace the Deore set?
What's the cost for shipping to Germany and how long would it take approximately?
Regards
Axel
SJS Customer Service:
The cranks will replace the Deore but you will need new chainrings as this uses a different BCD to the older LX cranks, you will also need to make sure the bottom bracket is the correct length. Postage is calculated on ordering, we cannot give an approximate ETA due to customs delays. SK 30/03/23
Does the BB have to be 113 mm in width?
By Simon
25 May 2020
My tandem currently runs with two 122.5 mm bottom brackets housed in 68 mm shells. Would it be possible to fit this to the existing BB of 122.5 mm or do I have to buy and fit a couple of 113 mm BBs as your description implies?
SJS Customer Service:
to get a correct chainline 113mm b/b are needed.RT
Can I use a 28124 Thorn 155mm right crank with this one? Are they the same?
By Kitti
20 May 2020
SJS Customer Service:
Hi, they are not the same. On this chainset the ring is on the left hand side of the bike, on 28124 the ring is on the right. If you use 28124 on the left the pedal threads will be wrong. If you fit a R/H pedal to a R/H crank on the left of the bike it will unwind as you are cycling. Thanks
My tandem has the timing chain on the left on a single chain ring.
By Matthew Wyatt
17 Apr 2020
Does this take a single chain ring? Looking for my left sided timing chain. Thanks!
SJS Customer Service:
Hi, yes this is a front crankset, for a single chainring on the left side. Thanks. 22/04/2020
What Would I Need To Fit This To My Bike?
By Jacqueline
09 Mar 2016
I have a BBUB26 (spindle 113mm), and a triple chain ring set with ratios 32/42/52 all shimano components.
Cheers
J
Cheers
J
SJS Customer Service:
Hi,
This is for the front of a tandem with the cranks with the spider being on the left hand side so although you could fit 3 chainrings there would not be much point as the front derailleur would not work as they'd be on the wrong side of the bike.
Thanks.
This is for the front of a tandem with the cranks with the spider being on the left hand side so although you could fit 3 chainrings there would not be much point as the front derailleur would not work as they'd be on the wrong side of the bike.
Thanks.