Shimano Altus FD-M310 8 Speed Conventional Swing Front Derailleur - Multi 28.6/31.8/34.9mm
£21.99
was
£21.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Altus wide link 8-speed compatible dual pull multi-fit front derailleur
Conventional down swing design
Low-friction wide linkage reduces shifting effort and increases rigidity
Dual pull design allows it to be used with top or bottom cable routing
Multi clamp band is compatible with all frame dimensions
66-69 degree chainstay to seat tube angle range
For outer chainring size from 42 to 48 tooth, total capacity 20 teeth
Compatible with 8-speed drivetrains. For use with 6 or 7 speed, use an 8 speed chain.
Conventional down swing design
Low-friction wide linkage reduces shifting effort and increases rigidity
Dual pull design allows it to be used with top or bottom cable routing
Multi clamp band is compatible with all frame dimensions
66-69 degree chainstay to seat tube angle range
For outer chainring size from 42 to 48 tooth, total capacity 20 teeth
Compatible with 8-speed drivetrains. For use with 6 or 7 speed, use an 8 speed chain.
Specification
Downloads
Download File
Associated Components
Part Number
Description
Availability
Y59L19800
Clamp Bolt (M5 x 18.5)
Discontinued
Y5GN98010
Cable Fixing Bolt Unit (M5 x 9.8)
Discontinued
Stocked by SJSC
Y5L298010
Clamp Band Adapters for S-size / f28.6 mm (1-1/8") A-Type
Discontinued
Y5KJ98010
Stroke Adjust Screws (M4 x 12) & Plate
Discontinued
Questions & Answers (5)
Is this compatible with a 2x7 speed, 46-30T crank and 12-32T cassette?
By Richard
11 May 2021
SJS Customer Service:
Thank you for your enquiry, yes it will be fine
WD 12/05/21
WD 12/05/21
Upgrade/replacement for FD-M191
By Raimund
29 Jul 2020
I have a siezed FD-M191 on my bike (with a 48-38-28 crank, 31.8 post, 8 speed rear cassette, down pull, SL-M310 shifters)
Would this be an adequate replacement?
Would this be an adequate replacement?
SJS Customer Service:
Im sure this would suit fine, as its in keeping with your existing 8 speed system.
Can I use this
By Lynne
24 Jul 2020
I have an 8 speed 48/38/28 triple chainring. I am looking for a down pull front derailleur. I am not sure if this is the right part?
SJS Customer Service:
From the information provided, this would work.
Thanks - 28/07/20
Thanks - 28/07/20
Will this mech work with an Acera triple chainset and triple shifter?
By Bob Baker
25 Feb 2020
SJS Customer Service:
Hi, if your chainset is 44/32/22 then no. The max capacity of this mech is 20 teeth eg 42/32/22. Thanks
Will This Altus Front Changer Work With A Top Cable Pull?
By Robin Hickman
02 Aug 2016
none
SJS Customer Service:
Hi,
This Altus front derailleur should indeed be suitable for use with a top cable pull.
Thanks.
This Altus front derailleur should indeed be suitable for use with a top cable pull.
Thanks.