Shimano Deore XT FD-T8000-H 10 Speed Triple Front Derailleur - Conventional Swing - 63-66 Deg
£41.99
was
£41.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- Lightweight front Conventional swing 10-speed trekking derailleur for smooth gear changes
- Dual Pull design for use with top or bottom cable routing
- The regular Multi-fit band clamp assures easy and secure fit on any frame type, with adapters to suit seat tube sizes 34.9, 31.8 and 28.6 mm
- Reinforced light weight chain guide adds rigidity and improved response
- Wider pivot link increases torsional rigidity
- Easy access angled adjustment screws and clamp bolt
- Angled inner chain guide tail for increased tyre clearance
- 10-speed design - for use with 10-speed trekking drivetrains
- Specifically developed for 68 and 73 mm bottom bracket shells with a 50 mm chain line
- 63-66 degree chainstay to seat tube angle range
- 48 tooth outer ring compatible, total capacity 22 teeth
- Dyna-Sys 10-speed MTB drivetrain compatibility
- Dual Pull design for use with top or bottom cable routing
- The regular Multi-fit band clamp assures easy and secure fit on any frame type, with adapters to suit seat tube sizes 34.9, 31.8 and 28.6 mm
- Reinforced light weight chain guide adds rigidity and improved response
- Wider pivot link increases torsional rigidity
- Easy access angled adjustment screws and clamp bolt
- Angled inner chain guide tail for increased tyre clearance
- 10-speed design - for use with 10-speed trekking drivetrains
- Specifically developed for 68 and 73 mm bottom bracket shells with a 50 mm chain line
- 63-66 degree chainstay to seat tube angle range
- 48 tooth outer ring compatible, total capacity 22 teeth
- Dyna-Sys 10-speed MTB drivetrain compatibility
Specification
Downloads
Download File
Associated Components
Part Number
Description
Availability
Y5ZL98010
Stroke Adjust Screws (M4 x 8.5) & Plate
Discontinued
Y5ZL98020
Cable Fixing Bolt & Plate
Discontinued
Y5ZM98010
Cable Fixing Bolt & Plate
Discontinued
Questions & Answers (5)
Is this compatible with SHIMANO Deore MTB FC-M6000 3x10-speed 40-30-22 Teeth Crank Set
By Darryl Needham
28 Jul 2022
Using microshift bar end shifters
SJS Customer Service:
Yes this should work fine,
JK 01.08.22
JK 01.08.22
Can I use this with 9 speed cassette and 44/36/26
By Anonymous
09 Jun 2022
SJS Customer Service:
No, its a 10-speed Front Derailleur so you would need a 9-speed front mech.
JK 10.03.22
JK 10.03.22
Is this a down pull front mech?
By nick
12 Nov 2021
SJS Customer Service:
Thank you for your enquiry, it is dual pull so will work with both top and bottom pull
WD 15/11/21
WD 15/11/21
Hi, Can this be used with a triple x 6 speed?
By Phil
27 Oct 2020
It appears only the cheaper front changers, like the Tourney state compatibility with a 6 speed. I wanted something like this of higher quality. Generally are those front changers supporting more more speeds than 6 compatible with 6 speeds?
Thanks.
Thanks.
SJS Customer Service:
Front changes need to be mated to the correct speed chain- in some cases, you can use a 10 speed changer with a 9-speed system as the chain widths are similar however something like this is so far out it will not work.
JK 27.10.20
JK 27.10.20
Dyna sys?
By Damian
24 Sep 2018
I'm trying to get a new Shimano triple front derailleur using a friction shifter. Not using anything Dyna sys. As I don't want Dyna sys
Is this product Dyna sys? It doesn't say it is. But...
Is this product Dyna sys? It doesn't say it is. But...
SJS Customer Service:
Hi, Shimano 8000 series components are Dyna-Sys. Thanks