Shimano Deore XT FD-T8000-H 10 Speed Triple Front Derailleur - Conventional Swing - 63-66 Deg
£41.99
was
£41.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- Lightweight front Conventional swing 10-speed trekking derailleur for smooth gear changes
- Dual Pull design for use with top or bottom cable routing
- The regular Multi-fit band clamp assures easy and secure fit on any frame type, with adapters to suit seat tube sizes 34.9, 31.8 and 28.6 mm
- Reinforced light weight chain guide adds rigidity and improved response
- Wider pivot link increases torsional rigidity
- Easy access angled adjustment screws and clamp bolt
- Angled inner chain guide tail for increased tyre clearance
- 10-speed design - for use with 10-speed trekking drivetrains
- Specifically developed for 68 and 73 mm bottom bracket shells with a 50 mm chain line
- 63-66 degree chainstay to seat tube angle range
- 48 tooth outer ring compatible, total capacity 22 teeth
- Dyna-Sys 10-speed MTB drivetrain compatibility
- Dual Pull design for use with top or bottom cable routing
- The regular Multi-fit band clamp assures easy and secure fit on any frame type, with adapters to suit seat tube sizes 34.9, 31.8 and 28.6 mm
- Reinforced light weight chain guide adds rigidity and improved response
- Wider pivot link increases torsional rigidity
- Easy access angled adjustment screws and clamp bolt
- Angled inner chain guide tail for increased tyre clearance
- 10-speed design - for use with 10-speed trekking drivetrains
- Specifically developed for 68 and 73 mm bottom bracket shells with a 50 mm chain line
- 63-66 degree chainstay to seat tube angle range
- 48 tooth outer ring compatible, total capacity 22 teeth
- Dyna-Sys 10-speed MTB drivetrain compatibility
Specification
Downloads
Download File
Associated Components
Part Number
Description
Availability
Y5ZL98010
Stroke Adjust Screws (M4 x 8.5) & Plate
Discontinued
Y5ZL98020
Cable Fixing Bolt & Plate
Discontinued
Y5ZM98010
Cable Fixing Bolt & Plate
Discontinued
Questions & Answers (4)
Is this compatible with SHIMANO Deore MTB FC-M6000 3x10-speed 40-30-22 Teeth Crank Set
By Darryl Needham
28 Jul 2022
Using microshift bar end shifters
SJS Customer Service:
Yes this should work fine,
JK 01.08.22
JK 01.08.22
Can I use this with 9 speed cassette and 44/36/26
By Anonymous
09 Jun 2022
SJS Customer Service:
No, its a 10-speed Front Derailleur so you would need a 9-speed front mech.
JK 10.03.22
JK 10.03.22
Is this a down pull front mech?
By nick
12 Nov 2021
SJS Customer Service:
Thank you for your enquiry, it is dual pull so will work with both top and bottom pull
WD 15/11/21
WD 15/11/21
Hi, Can this be used with a triple x 6 speed?
By Phil
27 Oct 2020
It appears only the cheaper front changers, like the Tourney state compatibility with a 6 speed. I wanted something like this of higher quality. Generally are those front changers supporting more more speeds than 6 compatible with 6 speeds?
Thanks.
Thanks.
SJS Customer Service:
Front changes need to be mated to the correct speed chain- in some cases, you can use a 10 speed changer with a 9-speed system as the chain widths are similar however something like this is so far out it will not work.
JK 27.10.20
JK 27.10.20