Busch & Muller High Quality Aluminum Stay Fitting Bracket
£19.99
was
£19.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
This aluminium bracket will allow you to fit your bottle dynamo on to the standard size tubing of seat stays.
Fits stays from 15mm to 25mm in diameter
Fits stays from 15mm to 25mm in diameter
Specification
Downloads
Download File
Questions & Answers (6)
I have "wavy" seat stays , will this work?
By Loz
26 Sep 2024
SJS Customer Service:
It will depend on the severity of the wave in the stays but it should still work. SK26/09/24
What are the approximate distances between the centres of the bolts?
By Anonymous
31 Jan 2022
SJS Customer Service:
Thank you for your enquiry, it is 28mm
WD 31/01/22
WD 31/01/22
Maximum width front fork supported?
By plevyadophy
04 Apr 2018
The front forks on my trike are 36.5 wide (diameter).
Will this clamp/bracket be suitable?
If not, do you sell anything that would be suitable? I would be using the clamp/bracket to support an AXA HR bottle dynamo.
Thanks in advance.
Regards
plevyadophy
Will this clamp/bracket be suitable?
If not, do you sell anything that would be suitable? I would be using the clamp/bracket to support an AXA HR bottle dynamo.
Thanks in advance.
Regards
plevyadophy
SJS Customer Service:
Hi there, the maximum this would take is 20mm.
For that sort of size we would recommend having something custom made.
Thanks.
For that sort of size we would recommend having something custom made.
Thanks.
Effect on frame?
By Peter
23 Nov 2017
Hello
Does this bracket do much damage to the frame? I imagine that it has to be very tightly mounted to keep it and the dynamo in a fixed position, and that this might bite into the paintwork somewhat. Also, can it be used with any brand of side-runner dynamo? Thanks.
Does this bracket do much damage to the frame? I imagine that it has to be very tightly mounted to keep it and the dynamo in a fixed position, and that this might bite into the paintwork somewhat. Also, can it be used with any brand of side-runner dynamo? Thanks.
SJS Customer Service:
Hi,
Due to the nature of its design it is possible that some damage to the paint work could occur, to help prevent this you can run a lining of tape over the frame where this will clamp to. It should be compatible with any brand of side-runner dynamo.
Thanks.
Due to the nature of its design it is possible that some damage to the paint work could occur, to help prevent this you can run a lining of tape over the frame where this will clamp to. It should be compatible with any brand of side-runner dynamo.
Thanks.
For use with Busch & Muller Dymotec 6 Sidewall Bottle Dynamo?
By Thomas Phillips
15 Sep 2017
Would I use this with a Busch & Muller Dymotec 6 Sidewall Bottle Dynamo? I presume a left sided dynamo is needed for the back. I intend to clamp onto the seat stays.
SJS Customer Service:
Hi,
This bracket is fine for use with the Busch & Muller Dymotec 6. The left/right option refer to the side of the tubing that the dynamo is fitted to, rather than the side of the bike.
Thanks.
This bracket is fine for use with the Busch & Muller Dymotec 6. The left/right option refer to the side of the tubing that the dynamo is fitted to, rather than the side of the bike.
Thanks.
Will This Fit The Schmidt Rack Mount Rear Dynamo Light?
By Adam
20 Jul 2015
Are there any other brackets which would work for attaching the Schmidt SON rear light to the seat stays?
SJS Customer Service:
Hi,
There are no set brackets for fitting the rack version of the Schmidt rear light to your chainstays, but you should be able to use this bracket along with another Busch and Muller bracket to achieve it, the other bracket is SJSC part number 1964.
Thanks.
There are no set brackets for fitting the rack version of the Schmidt rear light to your chainstays, but you should be able to use this bracket along with another Busch and Muller bracket to achieve it, the other bracket is SJSC part number 1964.
Thanks.