Busch & Muller USB-Werk
£119.99
was
£119.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Busch & Muller have designed the USB-Werk with an integrated cache battery. It supplies 5V and up to 1A current. The battery ensures a constant voltage supply during slow riding and / or stops. For this reason the USB-Werk is a perfect fit for charging / powering USB devices such as mobile phones, GPS, MP3 player. The unit is supplied with cable and USB socket.
- Measurements: 32 (W) x 88 (L) x 23 (H) mm
- Can be used with the Universal Cockpit Adapter
- Measurements: 32 (W) x 88 (L) x 23 (H) mm
- Can be used with the Universal Cockpit Adapter
Specification
Downloads
Download File
Questions & Answers (7)
Can this be directly connected to a Son 28 dynamo hub?
By Borneoman
01 Mar 2023
Can this be connected directly to my Son 28 dynamo hub and to use for just charging my equipment?
SJS Customer Service:
Hi
Thank you for your enquiry, yes this can be connected to a SON 28 with spade connectors & then used to charge a device.
Kind Regards. JP 01/03/23
Thank you for your enquiry, yes this can be connected to a SON 28 with spade connectors & then used to charge a device.
Kind Regards. JP 01/03/23
Have an old one not used for a couple of years how can i check it is working
By Derek
03 Aug 2022
Tried a couple of rides plugged into phone no significant% change on phone indicator. If not working can internal battery be replaced?
SJS Customer Service:
The only way to test is to run it on the bike and attempt to charge something, the internal battery is nonreplaceable.
JK 04.08.22
JK 04.08.22
Is the USB output connector waterprooof?
By chris johnstone
23 Jan 2020
SJS Customer Service:
Hi
We would say that the USB Werk is water resistant & not water proof, the connectors are fairly well protected within the housings however persistent heavy rain could eventually have an affect.
Kind Regards. 23/01/20
We would say that the USB Werk is water resistant & not water proof, the connectors are fairly well protected within the housings however persistent heavy rain could eventually have an affect.
Kind Regards. 23/01/20
Is the voltage/amps high enough to charge a very large Anker Power bank? (20,000mAh)
By Alex
23 Mar 2019
Basically with it be powerful enough with a constant voltage to charge up something so large?
SJS Customer Service:
Hi there,
As we have never tried to use this with something so large we would have no idea if this would charge or not I'm afraid.
Thanks.
As we have never tried to use this with something so large we would have no idea if this would charge or not I'm afraid.
Thanks.
Can It Charge Iphones?
By KeirBailey
13 Mar 2017
Your website says the E week can't charge iPhones. Can the USB werk?
SJS Customer Service:
Hi,
As the output is regulated at a fixed amp rating on the USB Werk it is indeed suitable for use with IPhones.
Thanks.
As the output is regulated at a fixed amp rating on the USB Werk it is indeed suitable for use with IPhones.
Thanks.
Is It Possible To Plug A Ewerk Usb Charging Device Into My Schmidt Edelux Head Light
By robert mcmillan
12 Mar 2017
SJS Customer Service:
Hi,
the charging device will need to be wired directly into the dynamo as the rear output from the front light will not be sufficient to charge it. Depending on your dynamo you should be able to wire the light and charging device directly into the hub using piggy-back connectors.
Thanks.
the charging device will need to be wired directly into the dynamo as the rear output from the front light will not be sufficient to charge it. Depending on your dynamo you should be able to wire the light and charging device directly into the hub using piggy-back connectors.
Thanks.
Should I Disconect My Usb Werk When Not In Use?
By john moulton
03 Dec 2015
SJS Customer Service:
Hi,
We would recommend if possible disconnecting the USB Werk from the hub when not in use as it will still provide extra drag to the rolling of the hub. It is however completely up to you if you remove it completely from the bike, this would take longer for removal and re-instalment but would mean that you didn't have an electrical device and wiring sat on your frame exposed to the elements when its not even being used.
Thanks.
We would recommend if possible disconnecting the USB Werk from the hub when not in use as it will still provide extra drag to the rolling of the hub. It is however completely up to you if you remove it completely from the bike, this would take longer for removal and re-instalment but would mean that you didn't have an electrical device and wiring sat on your frame exposed to the elements when its not even being used.
Thanks.