Igaro Solar Panel Lead
£8.99
was
£8.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
This accessory combines dynamo and solar power for greater output. Solar is used before dynamo power which for lower power requirements will result in reduced drag. In good sunlight and with pedalling the Igaro D1 will provide up to 3A at the USB port allowing for charging high capacity devices in reduced time.
This accessory will work with any solar panel rated 7-18V (12V recommended). We do not recommended a solar panel rated above 15V as high sunlight may cause this to rise above 20V, triggering the Igaro D1's over-voltage protection.
Specification:
- IP69 Waterproof
- Reverse voltage protection
- 92% end-to-end efficiency (12V)
- Uses solar over dynamo power for reduced dynamo drag or combines both for higher output
- 150cm Wire length
- Only works while pedalling
Requirements:
- Igaro D1 Model 5+ (d105+)
- A 12V solar panel (5W+ recommended)
Installation:
Remove the weather protection seal from the Igaro D1's second accessory socket using a screwdriver. Connect the lead to the socket and screw the cover to mate the waterproof seal.
This accessory will work with any solar panel rated 7-18V (12V recommended). We do not recommended a solar panel rated above 15V as high sunlight may cause this to rise above 20V, triggering the Igaro D1's over-voltage protection.
Specification:
- IP69 Waterproof
- Reverse voltage protection
- 92% end-to-end efficiency (12V)
- Uses solar over dynamo power for reduced dynamo drag or combines both for higher output
- 150cm Wire length
- Only works while pedalling
Requirements:
- Igaro D1 Model 5+ (d105+)
- A 12V solar panel (5W+ recommended)
Installation:
Remove the weather protection seal from the Igaro D1's second accessory socket using a screwdriver. Connect the lead to the socket and screw the cover to mate the waterproof seal.
Specification
Downloads
Download File
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).