Co-Motion Rohloff Shifter for Speedhub 500/14
£199.99
was
£199.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Finally, we have a Rohloff Speedhub 14-speed shifter designed to accommodate modern drop style road handlebars with a 31.8mm clamp size. Our version conveniently mounts next to the stem, allowing full use of the handlebars while shifting from an upright riding position. Manufactured entyrely in-house from 6061 aluminum, then hard anodized black, and laser etched for easy viewing. A clean and simple two piece design incorporates two O-rings to seal out the water and dust.
Cables not supplied.
Approx shifter area diameter is 52mm
Cables not supplied.
Approx shifter area diameter is 52mm
Specification
Downloads
Download File
Questions & Answers (6)
Replacement cables
By Steve
26 Sep 2024
I want to replace the shifter cables, one of these shifters paired to a standard Rolhoff cable box at the hub. Medium sized road bike. What cables etc should I order? Thanks.
SJS Customer Service:
Hi
Thank you for your enquiry, you will need our item number 16487 which will then enable you to trim them to the correct length.
Kind Regards. JP 01/10/24
Thank you for your enquiry, you will need our item number 16487 which will then enable you to trim them to the correct length.
Kind Regards. JP 01/10/24
Is this compatible with the Ritchey Ergomax bars?
By James
05 Jun 2024
As in will it go over the flattened top profile? Thanks
SJS Customer Service:
Hello, thank you for your enquiry.
Unfortunately these will not fit the Ritchey Ergomax Bars, the angle is too tight for the shifter to be maneuvered through.
Hope this helps TC 05/06/24
Unfortunately these will not fit the Ritchey Ergomax Bars, the angle is too tight for the shifter to be maneuvered through.
Hope this helps TC 05/06/24
how to separate shifter
By Paul
09 Nov 2023
How can the shifter be separated so that it can slide around the curvature of a compact drop bar (90mm drop)?
SJS Customer Service:
For any information or advice on any of Thorn bikes, frames and forks or Rohloff parts, please contact our dedicated sales team either on 01278 441505 or [email protected] and they'll be able to provide you with all of the information you need.
Co motion with aero bars
By Nigel
21 Nov 2019
I’d like to fit this to my drop bars but to the RIGHT of where my aerobars are fitted. Is this possible or does the co motion have to be fitted close to the stem? I am happy to change my dro bars as well if needed.
SJS Customer Service:
Hi there,
You should be able to move it along slightly so it fits next to your aero bars without an issue. Please bare in mind that this is designed for use with a 31.8 clamp, so it may be loose fitting so you may need to use something to fill the gaps.
Thanks.
You should be able to move it along slightly so it fits next to your aero bars without an issue. Please bare in mind that this is designed for use with a 31.8 clamp, so it may be loose fitting so you may need to use something to fill the gaps.
Thanks.
What Handlebars Would You Suggest As The Best For This Shifter?
By DAVID
12 Apr 2017
SJS Customer Service:
Hi,
As this shifter separates and fits to the larger swell of the bar it means its pretty much universal so almost any oversized (31.8mm) handlebar will work, allowing you to choose the size and shape that best suits you.
Thanks.
As this shifter separates and fits to the larger swell of the bar it means its pretty much universal so almost any oversized (31.8mm) handlebar will work, allowing you to choose the size and shape that best suits you.
Thanks.
How Long Is The 31.8Mm Part Of The Handlebar Needed To Mount The Shifter? Thank You.
By Stefano
26 Feb 2017
SJS Customer Service:
Hi,
This shifter only requires 10mm of space on the handlebar to be fitted.
Thanks.
This shifter only requires 10mm of space on the handlebar to be fitted.
Thanks.