Microshift BS-M10 10 Spd Bar End Shifters - Shimano Compatible
£79.99
was
£79.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- 10 Speed
- Compatible with Shimano 10 speed MTB shifters
- Friction double/triple front shifting
- Index / friction transferable rear shifting
- Aluminium bracket
- Aluminium cold forged / anodized lever
- Stainless slick shift cable
- Compatible with Shimano 10 speed MTB shifters
- Friction double/triple front shifting
- Index / friction transferable rear shifting
- Aluminium bracket
- Aluminium cold forged / anodized lever
- Stainless slick shift cable
Specification
Downloads
Download File
Questions & Answers (11)
Can I use these shifters with a Tiagra RD-4700 10 speed LONG CAGE REAR MECH please
By Jonny
30 Aug 2023
SJS Customer Service:
Hello & thank you for your enquiry.
No these item are non compatible as they are MTB ratio shifters, you need SJS Cycles part options for 10 speed under our product search section - Transmission, Gear Shifters - bar end / down tube, & then filter for 10 speed & select under your appropriate budget.
Kind regards, pc 31/8/23.
No these item are non compatible as they are MTB ratio shifters, you need SJS Cycles part options for 10 speed under our product search section - Transmission, Gear Shifters - bar end / down tube, & then filter for 10 speed & select under your appropriate budget.
Kind regards, pc 31/8/23.
Will these work with Shimano deore xt t8000 rear mech 10 speed?
By W85
17 Mar 2022
SJS Customer Service:
Thank you for your enquiry, yes these will be fine
WD 17/03/22
WD 17/03/22
Can I use these shifters or an 11 speed micro shifter with a 10 speed 105 RD and cassette
By Chris
18 Nov 2020
SJS Customer Service:
NO, as these are for MTB derailleurs, not the road (Shimano 105).
JK 19.11.20
JK 19.11.20
Can I use with a Sturmey Archer CS-RK3 hub?
By Ben
18 May 2020
Any reason the left hand "front mech" friction lever would not work with a Sturmey Archer CS-RK3 hub?
SJS Customer Service:
You would have no indexing / knowing where you were within the hub indexing. We would not recommend it.
Thanks - 18/05/20
Thanks - 18/05/20
Hi, can I use these with a Deore 3 x 9 transmission?
By Ian
16 Mar 2020
I’m looking to upgrade to 3 x 10 speed Deore in future, but would like to use these if possible to replace broken 9 speed Sti levers in the short term. Thanks
SJS Customer Service:
These can be used in friction, so yes!
Thanks - 17/03/20
Thanks - 17/03/20
Is this compatible with Dura Ace 7700 9 speed derailleur?
By thomas
29 Feb 2020
i’m on a budget an would like to share these bar-ends on 2 bikes. One runs a Ultegra RD-6700-A 10 speed (so that should work fine), the other is an older Dura Ace 7700 9 speed. Would these shifters work on that bike as well? For example, by using the L screw to limit the last cog? Thank you.
SJS Customer Service:
No, these are MTB ratio shifters, you need SJS Cycles part number : 19586 for the 10 speed. For the 9 speed; SJS Cycles part number : 38061
AND SJS Cycles part number : 38063
Thanks! - 03/03/20
AND SJS Cycles part number : 38063
Thanks! - 03/03/20
Can these be used as downtime shifters??
By Laurie Husband
27 Jul 2019
SJS Customer Service:
Yes you could convert these to work on the downtube.
Thanks - 29/07/19
Thanks - 29/07/19
Lever material
By Danny
10 Jun 2019
The description makes it sound like the level is also aluminum. Is this correct? Or, is it aluminum with a rubber housing?
SJS Customer Service:
Yes, the lever is fully aluminium, with a rubber covering.
Thanks - 11/06/19
Thanks - 11/06/19
Compatibility
By Steven De'ath
27 Apr 2019
I would like to run a 10spd Shimano Deore M610 rear mech and a Shimano 105 5700 10spd front mech on a gravel bike. Would these shifter be compatible with both mechs?
SJS Customer Service:
Hi, yes. The rear indexing should be fine, the front will be friction. Thanks 29/04/2019
Do you sell it only in pairs? Should I buy set even if I need right shifter for 1x10 transmission?
By Ruslan
24 Dec 2018
SJS Customer Service:
Hi there,
Unfortunately we do only sell these as pairs.
Thanks.
Unfortunately we do only sell these as pairs.
Thanks.
Can I use the rear with an MTB long cage clutch mech to make a 1x10 drivetrain for drop bars?
By Tom
28 Oct 2018
As above, considering using a bar end shifter with an MTB clutch derailleur for 1x10 or 11 drivetrain ideally with indexed shifting.
Any suggestions, please? Thanks
Any suggestions, please? Thanks
SJS Customer Service:
Yes this will work with any Shimano MTB 10 speed rear mech, if you want to use 11 speed then you could use SJS Cycles part number : 35340 and add in to convert to use MTB 11 mech and cassette.
Thanks - 29/10/18
Thanks - 29/10/18