Rear Derailleur Hanger Extender

Compact 50/34 at the front and hopefully a 13/32 cassette, thanks.

I have a Shimano 105 FD5700 34/50 and a RD5600 short cage at the rear. Cassette is currently 11-28 but could I use this to get an 11-34?

i have a old bike with
52-39 and 14-26 with Shimano RD 6401 and FD 6401 8 speed.
Could i use this support for 14-34 ?

thanks from france

I am currently running a 10 sps 11-36 cassette with a shimano XT rear mech. Will this allow me to extend the Mech to use an 11-46 cassette please ?

Would this be the right part to extend a zee short cage mech to run an 11/36 cassette on an mtb,or would the sunrace extender be better
Thanks

My bike has
Cassette Shimano 105 11x28T 10sp
Chain KMC X10 SL 10sp
Crankset Shimano 105 Compact 34x50T
I'd like a cassete that is at least 11x32T or more than 32 if possible.
What cassettes sizes do you recommend please?.

I have a RD7700 Rear RD Dura Ace, 9 speed, will this help extend its normal capacity of 11t-27t, to increase it to 11t-30t? The front is a compact crank 50/34. Full Dura ace 7700 set. I tried the sun race but it doesn’t fit on the Principia RS6 hanger.

Thanks

Suisse

I have a shimano RD-M591 rear mech SRAM 42 tooth (1x) crankset. Could I use this to support a 11-42 or 11-46 ten speed cassette?

I have a tiagra 4601 long cage with 12x28 cassette. Could I put a 11x36 (or higher?) cassette on with this?

Need a lower gear for the big hills, so will replace the 11 - 42t cassette currently on my Cube touring pro hybrid 500.

I currently have an 11-25 cassette on my Campag Chorus standard length cage and wondered if I looked to increased this to an 11-29 with the hangar if this would likely necessitate a new chain?

If so what is the maximum range of cassette the Derailleur would take? I am looking towards an 11/40, failing g that would an 11/36 work?

Thanks.

Can I use in a 1x9 setup using: SRAM x9 short cage mech, 11-40t cassette, 34t chainring? Thanks I advance.

Will it extend it to take a 11-42 rear cassette

Will this work on a 11-42t or even a 46 t cassette? currently I use a shimano 10 speed XT 786 Long gage and a 11/36 XT Cssette

I have a Tiagra 50/34 crankset and 11-32 cassette. What is the largest cassette I could run with this extender?

I was wondering if your derailleur hanger extender would work with Campagnolo Chorus 8-speed?
Campagnolo states the maximum cog size is 26 teeth but I would like to try a cassette with a 28, 30 even a 32 tooth cog.
Thank you!

Could I use this with my ultegra 6870 short cage di2 rear derailleur to change from 11-28 to a 11-32 rear Cassette and using a 50/34 front chain ring ?

I'm looking for a 2nd-hand Airnimal, but most are 9-10spd with approx 11-32 cassettes and so I'd want to extend the gearing to approx 11-42. Does this hanger extender work with all Shimano derailleurs or are there some it doesn't work with? (I don't want to buy a bike for which I can't extend the gearing!) Thanks.

Hello, can I use this with shimano rx-810 rear derailleur? Right now it works with 11 speed 11-42 SLX, I would like to go for 11-46.

I have a 9 speed triple set up with a medium cage Claris rear Rear Derailleur front ring 50-39-30 rear cassette 11-30

Can I use this with sram 11 speed 11/36 cassette and Shimano 105 medium cage on a 2015/16 Specialized Roubaix sport sl4

what is the extension/offset dimension between the two bolt centres?

I've got a 44/28 upfront with Tiagra 4700 long cage rear derailleur and 11-34 cassette. This all works fine. Can I swap out the cassette for an 11-40 and use the extender to bridge the cap to the 40 tooth cog?

I wish to fit a 11-32 cassette without changing the 11sp force 22 rd short, the frame is a Boarman carbon pro slr, is this possible, thanks

I have a XT M760 rear derailleur low normal version and really love it. But i want to increase the cadence when climbing up so want to up the cassette up to 11-34 but this mostly exceed the derailleur capacity. Does this extension can solve this problem and my derailleur can work smoothly on this 34T cog?

thanks

2018 roubaix i have a Tiagra 10 speed with 50 34 and 11 34 cassette can i run a 36 or 40 with your drop link and assume longer chain ?

Hi
I have a Sram etap short cage rear derailleur which states a max capacity ot 28T cassette. I want to increase to a 30T cassette . Can I use this hanger and will it work? Thanks

My cheapo gravel bike has 46/36 crankset and Tiagra 4600ss rear mech. The cassette is 12/28.
What is the largest cassette that you would expect to be workable with this extender fitted?

Can you advise if this would fit my rear mech hanger on my Roubaix Comp 2010? I have tried to fit the Wolftooth adapter to it without success.

Thanks

Hi, would this work in conjunction with a Sram Force 10sp short cage RD, and standard (39/53T) cranks? I’m looking to switch from an 11-28 to a 12-32 cassette. Thanks.

I am trying to make a drop bar 1x10 set up running 42t chainring and 11x42t on the back.
It was suggested I could use the Shimano Tiagra 4700 10 Speed Rear Derailleur (GS) plus this hanger to get me the extra to the 42t.
is that possible?

I have a 50/34 Chainring and a 10 speed 105 Derailier and would like to fit a 34 tooth rear cassette. Would I have to fit a longer chain if I fit a hanger

After converting my 3x10 shimano xt/slx to SRAM NX Eagle, the rear derailleur doesnt fit. My hanger is to short and/or wrong shape for the B-screw to put the jockeywheels in the right distanse. I have a quickrelease shaft which won't fit on the Canyon-hanger for Sram for my bike since the right hanger is for 142x12-shaft. Will your product help? Can you post some pictures of your extended hanger in use on a bike please?

Can I fit custom 13-40 Cassette 7 Speed on my Tourney Rear Derialleur with Hanger Extender?

Current set up is 50-34 with a 30 rear sprocket ( just out of Shimano spec but works- just)
I need 34 sprocket at least to assist on steep climbs since a back injury.

Hi, would this be possible to use with my 6800SS derailleur and an 11-32 cassette? Thanks.

Hi,

I have an 'Adventure Flat White' touring bike with a short cage Shimano Tourney 7 speed (11-28t) & double 34-50t at the front.

I find that the current gear range is not low enough for me when in hilly areas.

Would this extender allow me to run a 12-32t cassette?
Is 32t the max you'd recommend or would 34t be reachable?

Thanks!

My current setup is Sram Red 10 speed, running a short cage rear derailleur and an 11/28 cassette. Will this item allow me to run the same short cage derralieur but with an 11/32 cassette?

I have a 105 short cage derailleur. With this widget, could use a tiagra 11-36 cassette, or do you think 11-34 is the limit?

The Chainsette is a FRM 53/39 on Zicral Rings. Rear wheel is a 9 speed 11-28 cassette on a Mavic Aksium wheel. Dura ce rear derailleur is short cage. I can't go to 10 speed unless I change my Dura Ace 9 speed handlebar control levers which I am reluctant to undertake.

Hello. Can I use this to make a Dura Ace derailleur work with a 11-32t cassette? I’ll be running a 50/34t chainring at the front.

Can I use this to enable me to use 12-32 or 11-32 with 11 speed Super Record?

I have a SRAM red etap group running 52/36 and 11-28 with the short cage RD. Would this allow me to install an 11-32? I don’t really want to shell out another £450 for the med cage RD. thanks.

Can you advise re the largest sprocket that would work/recommend a cassette?

Need a lower gear for long steep climbs. Icurrent setup is 52/36 witha11/30 cassette.rear derailleur is 8050 short cage. I have a 11/32 11 speed cassette. Shimano say replace derailleur with medium cage but I'd rather not spend £180 or buy compact 50/34 for similar cash. Will extender work?

Triple (48-38-28) 11-34 to 13-40, If I ignore 48T Chainring


Hi,

Thanks for your previous answer.


I currently have up front, a triple consisting of 48-38-28.

In the rear, my cassette is an 8 speed 11-34 and the Derailleur is a Shimano Tourney TZ which has a maximum cassette cog spec of 34T

I would like to upgrade my cassette to an IRD 8 Speed Elite 13-40.

In a previous answer you advised that:

“Generally triple set ups do not work with the Extender, the only way to tell with your specific bike is to test fit it.

The reason being is the rear derailleur simply is not capable of that amount of range. “.

However, I wasn’t ever planning on cross-chaining by using the big 48T chainring with the large 40T cassette cog (I only ever use the three smallest sprockets on the rear when using the big 48T chainring up front).

So with that in mind, would fitting this Derailleur Extension device present any problems?



Thanks in advance.

Hi,

I currently have up front, a triple consisting of 48-38-29.

In the rear, my cassette is an 8 speed 11-34 and the B-Tension Screw is screwed in the maximum amount (and with screw thread to spare). The Derailleur is a Shimano Tourney TZ

I would like to upgrade my cassette to an IRD 8 Speed Elite 13-40.

Using your hanger adapter, would I be able to do that?

Have a Campag Record 10-speed setup with a 12 - 28 cassette and 50/34 chain rings (SRAM crankset but who cares right?). I rarely ever use the three (12 - 14) cogs on the cassette. Aging knees beg for lower gearing. Would this allow me to run a wider range cassette and get lower gears leaving all else, inc. rear mech, in-situ? (trying to weigh up pro's and con's of a cassette change with this doodad vs putting smaller chain rings on the cranks)

sorry for the wrong questionning earlier .My bike is equipped with triple chain ring Campagnolo 30 40 50
the cassette and derailleur are both Campagnolo
11 to 29 T

can I fit your drop hanger and change the cassette up to 13 to 38 ?
with thanks
Daniel

can I fit to a triple chain ring with 10 speeds campagnolo derailleur

I have 1978 Cartlton Pro 5 frameset with 5 speed campy v3 nouvo rear derailleur and 24/14 freewheel,,42/51 crank. Will the extender adapter enable use of 5 speed 28/12 freewheel or even bigger if there is one?