Home > Transmission > Gear Spares > Gear Spares - Other

Jtek Special Thumb Shifter Brackets for 22.2 mm Bars - Black

Customer Reviews (16)

4.8 / 5| Write your review

£29.99

was

View supersize image

£29.99 was

Manufacturer :

SJS Cycles part number :

Manufacturer part number :

Details

NO barrel adjusters. CNC alloy brackets to convert 7/8/9/10/11 speed Shimano Ultegra/ Dura Ace bar end levers into old fashioned thumbies. NOTE>> also needs a pair of barrel adjusters from the down tube stops (our part number 24780). Complete with M5 x 45 screws and washers

Not compatible with all Microshift Bar-end shifters. These often have a lower profile than Shimano shifters and therefore the cable feed doesn’t line up

Product Reviews (16)

Questions & Answers (17) Q & A

Specification

Downloads

Download File

Product Reviews (16)

Overall Product Rating 4.8 / 5

Who knew?!

By Andrew

05 Nov 2024

5 / 5

I recommend this product

This is the value of asking the nice folk at SJS. They point you to things you never knew existed. Looking forward to moving my trusty bar end shifters across to the new flat bar set up on the tandem

Great for my bar end shifter conversion

By Tudor Davies

16 Jul 2024

5 / 5

I recommend this product

ConsNone

ProsGreat for converting Bar end shifters

After looking at new shifters and various alternatives,
I selected this product and after realising I had them the wrong way round they are perfect for my 8 speed Shimano shifters. Very pleased with the results

By Robert Paris

30 Sep 2022

5 / 5

I recommend this product

ProsWell made and good design

I was able to recycle my Shimano bar end shifters with these brackets. Very happy with my new handlebars, and the shifters that I always liked. I found that if you strip the end of your cable ( 3/8") you can screw it in the threaded hole of the bracket, solid connection.

Just the trick for converting bar end shifters!

By Brian I

23 May 2021

5 / 5

I recommend this product

ConsCould do with instructions supplied. Took a bit of experimenting to get them fitted.

ProsA good way to convert bar end shifters to thumb style shifters.

I bought a set of these so that I could convert my drop barred Dawes Horizon Touring bike, over to flat bars for more comfort.

To help the gear cables clear the bar bag, I added a set of v-brake noodles on the end of the recommended barrel adjusters.

Excellent in every respect.

By David Evans

22 Mar 2021

5 / 5

I recommend this product

ConsNone

ProsTop Quality, excellent value for money

Superior to more expensive alternates.

They do the job nicely

By Alex Taneus-Miller

22 Oct 2020

4 / 5

I recommend this product

ConsBit pricey in my opinion

ProsDo what they are supposed to do

I was able to use these to switch my old XTC from drop to straight bars. This solved the problem of finding compatible new shifters for my XT 9/3 gears. Sliding them on to the bars was a squeeze and I had to gently pry them open with a screwdriver. I mounted them inboard of the brake levers and on top of the bars so that I could achieve a finger and thumb shift. Instructions for which way round to fit them would have saved a bit of time.

By Anonymous

13 Oct 2019

4 / 5

I recommend this product

Fitted these under the bars but there is not enough room for my thumb so it shortens my bar length effectively. I thus mounted them on top. There is a little interference with reaching the brakes but i only need one finger so its ok. I've not tried mounting them stem side of the brake levers. They do the job and allow me to use my bar end shifters again. I didn't use thumbshifters in the early days as gripshift was what wa being sold so i always knew that the disadvantages would be new to me.
I'm sticking with the simplicity though. Didn't know if to but the microshift but these were cheaper as i had the shifters. They are metal which was a bonus as it wasn't obvious and thought they would be plastic.

Superb bit of kit

By Andy

21 Feb 2018

5 / 5

I recommend this product

ConsNone

ProsMuch less expensive than Paul Thumbies!

Brilliant. Not cheap, but worth every penny. I have these on Jones Loop bars, mounted under bar with Shimano Ultegra shifters in friction mode, swapped left to right to enable the under bar mount. This leaves the top of the bars clear to make best use of all the hand positions available with the Jones bars. Also hides the less attractive screw head!

By Anatoliy

03 Oct 2017

5 / 5

I recommend this product

Thank you for your attention to my order. The received goods completely satisfy me. Your shop works quickly and operatively. I hope for future cooperation.

Practical Kit

By Tom

08 Mar 2017

5 / 5

I recommend this product

ConsExpensive(but then I am tight)

ProsSimple to fit. Appearance.

Simple to assemble. Utilised my TT bike bar end shifters as surplus to requirements. Made conversion of drop bars to flat bars on my winter bike simple.

Nice Kit

By stewart

22 Oct 2012

5 / 5

I recommend this product

ConsI also think a bigger screw head would look nicer

Prosgood fit,

Perfect for my recumbent bike.( Challenge fujin sl 11) Original bar ends stuck in my legs when turning,up on the handle bars now, and easy to use.

Good Kit

By Tony

26 Sep 2012

5 / 5

I recommend this product

ConsNo instructions supplied

ProsPerformance

Solidly made and a good fit on the bars. Instructions would have saved a few minutes faffing!

Good Alternative To Paul Thumbies

By Anonymous

06 Aug 2012

4 / 5

I recommend this product

Consbigger screw head like the original Shimano srew

Prosperformance

just as already written:
these are perfect! think they`re not as high as the original paul thumbies. makes the bar bar look even cooler. great value. works with 10spd dura ace as well.

Retro Style Shifters.

By Paul,Derbys 19/4/12

19 Apr 2012

5 / 5

I recommend this product

ConsNone

ProsNone

Where would we be without parts like these.Put Shimano 105 8spd D/T shifters on them for mtb light weight tourer build.Perfect.Light and Sturdy part at a very good price that looks the business when assembled.

Great

By Peter

30 Oct 2010

5 / 5

I recommend this product

Work Perfectly, solid and easy install - highly recommend

Yeah!

By Anonymous

15 Oct 2010

5 / 5

I recommend this product

Consslightly bigger screw head would make it more beautiful

Prosprice, fitting, performance

these are perfect! think they`re not as high as the original paul thumbies. makes the bar bar look even cooler. great value. works with 10spd dura ace as well.

Questions & Answers (17)

Compatibility with microshift?

By Ed

21 Apr 2021

I have a Microshift BS-No8 shifter for a shimano nexus hub, will these be the right size or does the cable not line up?

SJS Customer Service:

Thank you for your enquiry, no sorry will not work with Microshift shifters.

WD 21/04/21

For d/t shifters?

By David Jones

28 Feb 2021

One answer says bar ends only, another says also ok for d/t versions. Which is right please?

SJS Customer Service:

It totally depends on the exact shifter in question due to differences in profile and cable routing- We have only tested them with the Shimano Dura-Ace SL-BS77 levers.

JK 01.03.21

Can I use this with the Sturmey Archer bar ends

By Hache

01 Nov 2020

Hi,
I have bar ends sturmey archer 3x5 (HSJ960 SLS50 5speed and S3X ) and I would like to mount them on thumb shifters
Would it work with these
thank you

SJS Customer Service:

Hello, I'm afraid these items are not compatible with each other due to issues with cable routing and pull direction.

JK 02.11.20

Can these be used with a 25.5 mm bar

By Fraser Macdonald

17 May 2020

I know they day 22mm but wondering if there's much room for adjustable

SJS Customer Service:

No way these would fit anything bigger than 22.2mm.

Thanks - 18/05/20

Can I use this with Shimano SL-7900 "Down tube" shifters?

By Niels Lyhne

27 Jan 2020

Hi again. Thank for Your reply.
Just to be sure. My Shimano SL-7900 are "Down tube" shifters and not "Bar end" shifters. The "Down tube" version is a little longer and not angled like the "Bar end" version.
Will it work?

SJS Customer Service:

Hi, if you have bar space the length will not be an issue. The raised square on the bracket is at an angle so that the cranked bar end shifters are parallel to the bars in a middle gear choice, your shifters will be in a slightly different position. Other than that they should be fine. Thanks 29/01/2020

Can i use this with Shimano SL-7900 10x2 speed shifters?

By Niels Lyhne

26 Jan 2020

I would like to move my down shifters up to the handle bar. Can i use this with my Shimano SL-7900 10x2 speed index down tube shifters?
Will it compromise the index shifting?
Kind regards
Niels

SJS Customer Service:

Hi
Thank you for your enquiry. Using these brackets with your shifters will find & shouldn't affect the index shifting at all, we've sold a complete set including the Dura-Ace shifters for some time with no issues.
Kind Regards. 27/01/20

Can I use with Shimano 105 8spd Down tube shifters ?

By Claude

01 Dec 2019

Quote Retro Style Shifters.
By Paul,Derbys 19/4/12
19 Apr 2012
5 / 5
I recommend this product
Cons
None
Pros
None
Where would we be without parts like these.Put Shimano 105 8spd D/T shifters on them for mtb light weight tourer build.Perfect.Light and Sturdy part at a very good price that looks the business when assembled.”

On the assumption that D/T stands for Down Tube, apparently they worked with Paul D/T shifters.
Unexpected compatibility ?
Can you confirm ?

SJS Customer Service:

Yes, these are designed to except a downtube shifter.

Thanks - 03/12/19

Will these work with Suntour XC Pro thumb shifters?

By John

25 Oct 2018

Please disregard my previous question. I want to use these with XC Pro thumbshifters, not bar end shifters. Thanks!

SJS Customer Service:

Hi there,

These should work absolutely fine, however as we have never tried this we cannot say for certain im afraid.

Thanks. 25/10/18

SJS Cycles part number : 21014

By R H

11 May 2018

Would these work with the Dia Compe Bar end shifters?

SJS Customer Service:

Hi there,

As far as we can tell, these will not work with Dia Compe shifters.

Thanks

Are they compatible with 10 speed MTB microshift bar ends?

By Christian

27 Apr 2018

Hi

I have a pair of 10 speed microshift MTB shifters, mounted on my drop-bar bike. I am thinking to convert to flat or alternative bars. Looking for a cheaper alternative to the paul thumbies (art. 43349) I found this product. In the description you say that they are not compatible with all the microshift bar ends. Can they be used with the ones I have?

Thanks.

SJS Customer Service:

Hi there,

We do not think these would work with your current shifters, the Paul ones would, but as you say, they command a higher price.

Thanks

Can you use shimano barrel adjusters with these?

By Mike H

22 Jul 2017

Hi
These appear to be threaded for barrel adjusters. Ih they are will the barrel adjusters from Shimano down tube cable stops fit?

SJS Customer Service:

Hello,

The barrel adjusters from the down tube cable stops will fit.

Thanks.

Jtek Special Thumb Shifter Brackets

By samuel

15 May 2017

Hi, may i know this Jtek Special Thumb Shifter Brackets come with Cable Adjusters too? if no which Cable Adjusters i need? Thank You

SJS Customer Service:

Hi,

They don't come with cable adjusters so we recommend the Jagwire Rocket II adjusters which are SJSC part number 24780.

Thanks.

Will This Fit On The Profile Design Airwing Os Towards The Bar Ends?

By P

21 Apr 2017

Hi, . I would to mount Shimano Bs79 bar ends shifter as thumbies at the ends of the bar next to some bar end brake lever. Would the product fit near the end of those bars?

Thanks.

SJS Customer Service:

Hi,

Unfortunately not, these thumb shifter brackets are designed for handlebars that are 22.2mm in diameter, unlike those Profile Design bars which use a diameter of 23.8mm.

Thanks.

1940S Cyclo Ballend Barcons To Thumbshifters

By Kev

10 Aug 2016

I was thinking of buying some old CYCLO-brand ballend barcon shifters from the 40s. Would these shifters that I am describing, http://velobase.com/ViewComponent.aspx?id=f54d2f2b-aa67-4741-824f-bd0e5b1dfef7, work with these thumbshifter mounts? Otherwise, how could custom mounts be rigged up? Thank you.

SJS Customer Service:

Hi, unfortunately these brackets will not work with the shifters that you are looking at on the link. The brackets have been designed for usage with modern Shimano bar end shifters. Regards

I Have Diacompe Downtube Shifters, Will They Fit On These Brackets ?

By Robert Paris

22 Nov 2015

I haveDiaCompe BrazeOn Down Tube Shifters (Power Ratchet Friction Control), SJS part 21015
Will they fit on these brackets ?
Thanks.

SJS Customer Service:

Hi,

I'm afraid these thumb shifter brackets are only designed to be used with bar end shifters and are not compatible with down tube shifters.

Thanks.

Will They Work With Shimano Dura Ace Tt 2X10 Shifters?

By David

06 Nov 2014

Dura Ace TT bar end shifters 2 x10 speed, it states that it works with 9 speed, but 10 is needed.

SJS Customer Service:

Hi,

These thumb shifter brackets are fine for use with Dura Ace bar end shifters even in 10spd, we already make a set up ourselves (SJSC part 21857). In answer to the other question you left, the price is for a pair.

Thanks.

Will The Below Product Work With 6 Speed

By Michael

03 Apr 2014

I've a pair of 600 6 speed shifters, will i be able to use these adapters?

SJSC Special Thumb Shifter Brackets for 22.2 mm Bars

kind regards

SJS Customer Service:

Hi,

These thumb brackets can be used with any Shimano style bar end levers, I doesn't matter what speed they are. They cannot be used with down tube shifters though.

Thanks.