Thorn Dropout Adaptor with Propstand Mount - 18 mm

Fits ALL Thorn models with Rohloff dropouts (SJSC#26518) ie except Mercury, to enable a ESGE KS18 Propstand to fit sjsc # 49938.

NOTE: if a rear rack is fitted you need to use one of the regular dropout adaptors on the other side to balance the central fitting of the rack, this will need to be bent out to accommodate the extra width of the adaptors (if not already fitted on the bike) the replacement items (SJSC#49690 or SJSC#11703) are in the associated items further down this page.

This is the ONLY way to fit a Kick/Prop stand to one of these bikes without voiding the frame warranty.

This still needs to be used with care, many of our reservations still apply, you could bend or break this adaptor or the stand if overloaded, but importantly this won't damage the bike frames integrity in any way!
The bracket (although expensive) should be considered sacrificial...in test we've deliberately bent and bent straight one of these brackets 4 or 5 times without significant reduction in it's strength.

Required to fit to the frame : 2 x M5x12mm socket cap bolts. The stand bolts to it with M6x20mm socket cap bolts, we recommend the use of Loctite or split washers on the stand bolts.(no fitting hardware included)