SJSC Ergo Control Bar End Grip - Black
£15.99
was
£15.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Cycling Plus Recommended 8/10 June 2007. Dan Joyce
“Frankly, every flat or riser bar bike should have a pair of these” Dan Joyce.
A new concept that delivers significantly improved leverage and control compared to normal bar ends. Dual density moulded construction combines aluminium and resin skeleton with firm kraton rubber covering. The ergonomic profile extends both fore and aft of the bar fitting your hand naturally.
Weight is aligned over the centre of the steering
A stiff and positive bar interface with grippy surface texture.
143g per pair
“Frankly, every flat or riser bar bike should have a pair of these” Dan Joyce.
A new concept that delivers significantly improved leverage and control compared to normal bar ends. Dual density moulded construction combines aluminium and resin skeleton with firm kraton rubber covering. The ergonomic profile extends both fore and aft of the bar fitting your hand naturally.
Weight is aligned over the centre of the steering
A stiff and positive bar interface with grippy surface texture.
143g per pair
Specification
Downloads
Download File
Questions & Answers (6)
Can I use these with Ergon GP1 Grips?
By Paul Fisher
20 Jul 2021
Can I use these with Ergon GP1 Grips? I guess the question is can the GP1 grips be pushed inboard the handlebar to make space for these?
SJS Customer Service:
Thank you for you enquiry, yes they will work with GP1 grips fine, however you will need to check if you have sufficient room on your bars to move them inwards.
WD 21/07/21
WD 21/07/21
What is the length/height of these?
By Brommie
25 Sep 2020
Specifically are they ok on Brompton, probably meaning measuring not more than 90-100mm when measured as other barends are. Presumably the measurement is from top surface of bar to top point of barend?
SJS Customer Service:
These are 125mm and work fine on a Brompton, the issue is unless S type you loose too much grip space.
Thanks
Thanks
Would these fit on the end of the bars with Ergon GP1?
By Neil
31 May 2020
SJS Customer Service:
Just fine, just need to slide the grip on further.
Thanks - 01/06/20
Thanks - 01/06/20
Fit to bar with grips
By Paul
02 May 2020
Do these fit around lock-on grips? Like the Cane Creek bar ends do. Or is there no space for the grip inside this bar end?
SJS Customer Service:
Hi, this bar end fixes directly to the end of a 22 mm handlebar. There is no space for a grip inside. Thanks
Swept back handlebar of 45 degrees
By Sal
23 Jun 2018
How would these bar ends be suitable for a handlebar with a backsweep of 45 degrees
SJS Customer Service:
These will fit handlebars with pretty much any amount of sweep so it is really up to the user as to whether they will be suitable ergonomically.
Thanks
Thanks
Do They Mount On The Handlebar Or In It Using A Expander Plug?
By Anonymous
05 Jun 2016
I am asking to figure out if I need extra space on my handlebar to fit these or can I just take the end caps of and mount them in the handlebar tube.
SJS Customer Service:
Hi,
These clamp over the outside of the end of the bars so you will need extra space on your handlebars to fit these.
Thanks.
These clamp over the outside of the end of the bars so you will need extra space on your handlebars to fit these.
Thanks.