Thorn MK2 Comfort Handlebars - 25.4mm Clamp - 620mm - Satin Black
£29.99
was
£29.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
The ultimate alloy riser bar for touring. Physio-designed geometry gives great comfort levels. Expertly made of 1.8/3.0/1.8mm 2014 double butted Al Alloy. Generous 25.4mm dia centre section for bar bags, lights, computers etc followed by tight bends (to save space). 190mm straight grip section each side, 100mm straight section in centre
Tech Specs:
- 18° Bend
- 65mm Rise
- 60mm Rearward Sweep
- 620mm Wide
- Weight 294g
Tech Specs:
- 18° Bend
- 65mm Rise
- 60mm Rearward Sweep
- 620mm Wide
- Weight 294g
Specification
Downloads
Download File
Questions & Answers (13)
Rearwards sweep in degrees
By Tracy Tomlinson
11 Nov 2024
I'm fitting a Redshift suspension stem to a new bike and need my hands infront of the steerer tube otherwise the Redshift won't work.
You talk about an 18 degree angle and I'm assuming that's the angle from the central section, before continuing to the 190mm straight section? There's also a mention of a 60mm rear sweep. Could you clarify the 60mm sweep in degrees please as it's rather critical?
You talk about an 18 degree angle and I'm assuming that's the angle from the central section, before continuing to the 190mm straight section? There's also a mention of a 60mm rear sweep. Could you clarify the 60mm sweep in degrees please as it's rather critical?
SJS Customer Service:
The sweep is of the bar is 18 deg, the 60mm refers to how far the end of the bar tip of the bar is behind the clamp area as a result of the back sweep. SK 13/11/24
Bar end recommendation
By Jeremy
24 May 2023
Could you recommend a set of bar ends which work with these handlebars please? Am currently using the bars with Ergon GA2 grips
Many thanks
Many thanks
SJS Customer Service:
Hello and thank you for your enquiry.
In recommending a set of bar ends to go with your current Ergon GA2 grips, firstly please take a look at stock item 13134 the SJSC Ergo Control bar ends. To fit these it would involve cutting the grip ends of your existing grips & moving your grips inward in order to fit these bar ends. Secondly, an alternative option, is item number 28403 the Ergon GP3 which has a built in bar ends.
Hope this helps.
Kind regards, PC 24/5/23.
In recommending a set of bar ends to go with your current Ergon GA2 grips, firstly please take a look at stock item 13134 the SJSC Ergo Control bar ends. To fit these it would involve cutting the grip ends of your existing grips & moving your grips inward in order to fit these bar ends. Secondly, an alternative option, is item number 28403 the Ergon GP3 which has a built in bar ends.
Hope this helps.
Kind regards, PC 24/5/23.
Upsweep angle?
By Anonymous
09 Aug 2022
It states that the backsweep is 18 deg. Can you tell me the upsweep angle?
SJS Customer Service:
the top of the bars can be adjusted so the grips are flat, upsweep or downsweep is achieved by rotating the bars in the stem clamp RT 10/08/2022
Can they be cut?
By Mike
18 May 2022
I'm looking at either these bars or JK 46142 to fit on a MTB used for touring. In the Thorn manual it says "cannot be cut"! Is there a reason for this? I would also like to fit bar ends as it makes climbing much easier. Would the 18' sweep lead to the bar ends pointing outwards? I believe the straights at the end of the bars is 190mm. Is this correct?
Many thanks, Mike
Many thanks, Mike
SJS Customer Service:
For any information or advice on any of Thorn bikes, frames and forks or parts, please contact our dedicated Thorn bikes sales team either on 01278 441505 or [email protected] and they'll be able to provide you with all of the information you need.
Q about rise dimension measurement, as per ‘Extra detail’ below.
By Ian Harris
08 Mar 2021
I have just ordered these bars but wanted to check that the 65mm rise is measured from the top of the straight (middle) section to the highest upper point at the bar ends?
SJS Customer Service:
The 65mm is measured from the centre of the bar, at the stem clamping section, to the centre of the bar and the grip section.
Thanks
Thanks
Upward bend
By SM
18 Feb 2021
Can you advise if there is any upsweep? If so is the 65mm rise including any upsweep?
SJS Customer Service:
Thank you for your enquiry, yes the 65mm rise includes the upsweep
WD 18/02/21
WD 18/02/21
Can I use this with Ergon GP5?
By Robin Cassells
13 Feb 2021
SJS Customer Service:
Thank you for your enquiry, yes will fit and work fine with Ergon grips
WD 15/02/2021
WD 15/02/2021
Is this product sold in Asia?
By Niko
21 Dec 2020
thank you for the explanation, is this product sold in Asia? .... I live in Indonesia, close to Singapore, or if I buy, how long does it take to arrive in Jakarta, Indonesia?
SJS Customer Service:
Due to the Pandemic we are currently unable to ship parcels outside of the UK. As soon as we are able to do so we will add your country back to our website. Due to the nature of the pandemic we are unable to predict when this will be. Our apologies for any inconvenience caused and thank you for your patience and understanding.
JK 22.12.20
JK 22.12.20
Can i use this with Tern Verge D9 folding bike
By Niko
15 Dec 2020
tern has a T-shaped handlepost and uses a double stem with a width of 9 cm, I need at least 10 cm wide in the middle of the handlebar, does the flat part of the handlebar thorn have a minimum width of 10 cm, before it curves up? BTW i'm from Jakarta Indonesia,
SJS Customer Service:
I would say it 10cm just before it starts curving up.
Hope this helps,
JK 18.12.20
Hope this helps,
JK 18.12.20
Which Ergon is best with these bars, GC1 or GP1?
By Robert Littlewood
19 Sep 2020
SJS Customer Service:
We would suggest the GP1.
Thanks
Thanks
Do you have this for 31.8? or can you recommend similar bars?
By CF
08 May 2019
I have used this handlebar on my old bike but have a new bike with a wider clamp size.
Can you recommend something similar that fits please?
Thanks
Can you recommend something similar that fits please?
Thanks
SJS Customer Service:
use our Jtek Two Piece Stem Shim - 31.8 mm Outer - 25.4 mm Internal - 50 mm Wide … search for part 24381
Suitability for barends?
By Anonymous
22 Feb 2018
I'm planning on buying a riser bar with some rearward sweep, but I'm concerned that this bar may not work well with my barends (Ergon GP5). Do you think it would be OK (is it wouldn't force the barends into an outward pointing position), or can you recommend a different bar that would be more suitable?
SJS Customer Service:
Hi there,
These will be fine with bar ends, the sweep is only 60mm so should not leave them pointing outwards.
Thanks
These will be fine with bar ends, the sweep is only 60mm so should not leave them pointing outwards.
Thanks
Suitable Gear Shifter And Brake Lever
By Anonymous
18 Sep 2014
Will Shimano Tiagra 4600 Double 10sp Flatbar Shifter and Shimano Tiagra R550 Brake Levers for flat bars fit on these handle bars
SJS Customer Service:
Hi,
Both of these parts should be fine for use on these bars. These handlebars use a 22.2mm grip area which is the same as all flat bars and the same as used by the clamps on these brakes and shifters.
Thanks.
Both of these parts should be fine for use on these bars. These handlebars use a 22.2mm grip area which is the same as all flat bars and the same as used by the clamps on these brakes and shifters.
Thanks.