White Industries Titanium Freehub Body for Shimano Hyperglide 8 / 9 / 10 / 11 Speed
£119.99
£119.99
Inc VAT
Add to my parts list
Only 2 in stock
Manufacturer : White Industries
SJS Cycles part number : 55680
Manufacturer part number : DRIVER15TS11
Details
White Industries' freehub bodies (also referred to as 'drivers') are made from 6-4 Titanium and are only compatible with White Industries hubs. These modern versions are made to work with 11 and 12 speed cassettes (but can work with older cassettes) and are compatible with all their current hubs and some older models. They feature pockets for 3 pawls/springs and will accept 24T or 48T pawls depending on the drive ring in your hub. Most of the hubs White Industries have made in the last few years will have the 48T drive ring and pawls installed but it's always good to confirm what you have by counting the teeth in the drive ring (inside the hub body) or contacting us for guidance.
Freehub bodies include bearings and springs, not pawls. Your old pawls will work fine unless damaged.
Shimano Hyperglide 8/9/10/11 Speed
White Industries refer to this driver simply as the 'Shimano 11 speed' driver and is the most common driver style being used today. Technically it's called a Shimano 'Hyperglide C' style. This driver is made of 6-4 Titanium and with an included 1mm spacer can be used to run 8, 9 and 10 speed HG style cassettes.
- Includes bearings and springs, not pawls (use your old pawls unless damaged)
- Works with pawls from 24T and 48T engagement systems
Compatible with all current hub models
- MI5 hubs made after 2016
Compatible discontinued hubs:
- H3 road hubs and CX11 disc hubs (you'll need an 11 speed adjustable axle end and to re-dish the wheel slightly)
Not compatible with:
- H1/H2 road hubs or MI6 mountain hubs
- 2015 or earlier hubs (except H3 road and CX11 disc)
- Weight: 75g
Freehub bodies include bearings and springs, not pawls. Your old pawls will work fine unless damaged.
Shimano Hyperglide 8/9/10/11 Speed
White Industries refer to this driver simply as the 'Shimano 11 speed' driver and is the most common driver style being used today. Technically it's called a Shimano 'Hyperglide C' style. This driver is made of 6-4 Titanium and with an included 1mm spacer can be used to run 8, 9 and 10 speed HG style cassettes.
- Includes bearings and springs, not pawls (use your old pawls unless damaged)
- Works with pawls from 24T and 48T engagement systems
Compatible with all current hub models
- MI5 hubs made after 2016
Compatible discontinued hubs:
- H3 road hubs and CX11 disc hubs (you'll need an 11 speed adjustable axle end and to re-dish the wheel slightly)
Not compatible with:
- H1/H2 road hubs or MI6 mountain hubs
- 2015 or earlier hubs (except H3 road and CX11 disc)
- Weight: 75g
Specification
MaterialTitanium
Weight74
Related products
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).