Wolf Tooth Boostinator HR for Hope Pro 2 EVO / Pro 4 Rear

Boostinator kits allow non-boost wheels to be mounted in Boost spacing frames and forks.

While incremental, the benefits of the 'Boost' 15 x 110mm front and 12 x 148mm rear axle standards are clear: better clearance for fatter tyres and rims and reduced dish for stiffer, stronger wheels. The big bummer? Taking full advantage requires not only a new frame and fork, but new wheels as well.

In response, we have developed the Boostinator. When paired with compatible 15 x 100mm or 12 x 142mm hubs, Boostinator kits allow existing wheels to be mounted in Boost-standard frames and forks. Disc and drivetrain positions are maintained and, thanks to a quick re-dish, spoke bracing angles are improved.

Boostinator kits consist of a specially-designed axle end cap and -in the case of rear kits- a precision-machined rotor spacer with a set of six high-strength bolts. In keeping with Boost specifications, the disc and cassette are shifted outboard, allowing brakes and derailleurs to function as designed.

Compatibility:
- Rear Boostinators require both a re-dish and rotor spacer
- Rear Boostinator kits are not approved for rotors larger than 183mm
- Hub spacing is 142mm rear and the Boostinator make them 148mm respectively
- Compatible with only 6-bolt rear wheels (there is no way to space centerlock rotors over 6mm)
- NOT recommended (or safe) for non-symmetric lacing like the 2:1 lacing like the 2:1 lacing found on some of Industry Nine's wheels
- NOTE: You will need to re-dish your wheel after installing any Boostinator

Boostinator HR:
- The Boostinator HR is compatible with 12 x 142mm Hope Pro 2 EVO and Pro 4 rear hubs
- Non-EVO Pro 2 hubs are not supported

Tech Specs:
- Weight: 18g