Sturmey Archer RS-RF3 3Spd Freewheel Hub - Silver - 36 Hub

£84.99
was
£84.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
- 3-Speed internal gear hub with gear ratio of 177%
- Gear steps of 33% and 33%
- Rotary gear selector without protrusions outside the frame
- 6061 Aluminium hub shell
- Compatible with 17 to 19 teeth sprocket
- Anodised alloy finish
- Axle Diameter: 3/8" Slotted
- Axle Length: 185mm
- Over Locknut Dimension: 129mm
- Right Axle Protrusion Length: 27mm
- Left Axle Protrusion Length: 29mm
- Pitch Circle Diameter: 67.0mm
- Flange Width: 56.6mm
- Centre to Flange Right: 19.2mm
- Centre to Flange Left: 37.4mm
- Spoke Compatibility: 13G & 14G
- Chain Line 1/8 Flat: 37.0mm
- Chain Line 1/8 Dished: 35.3mm / 38.7mm
- Chain Line 1/8 Deep Dished: 32.7mm / 41.7mm
- Chain Line 3/32 Flat: 36.6mm / 37.4mm
- Chain Line 3/32 Dished: 34.9mm / 39.1mm
- Weight: 990g

Gear Ratio:
- Overall Range - 177%
- Gear 1 - 75% (Gear 2 - 25%)
- Gear 2 - 100% (Direct Drive)
- Gear 3 - 133% (Gear 2 + 33%)

Includes 1/8 Inch Dished 17T Sprocket and 3 Speed C30 Dual Trigger Shifter.
Product Reviews (0)
Questions & Answers (4) Q & A
Specification
Downloads
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (4)
Is this available with a black shell?
By
26 Jun 2022
And is it really limited to 19 teeth sprockets or will larger fit?
Sadly we can only get this in Silver Shell, and SA says 19t is the largest one designed to fit.

JK 27.06.22
axle length
By
22 May 2020
Hi i already own this hub in a smaller axle length but its too small to fit my new frames thicker track (dolan) drop outs.
Is this 185mm axle available to buy seperately to swap over to mine. I can only find 177mm listed
The 185mm axle is - SJS Cycles part number : 50974

Thanks - 22/05/20
Does this hub come with HSJ221 Fulcrum Lever Set for Standard (Angled) End ?
By
29 Jan 2020
Does this hub come with HSJ221 Fulcrum Lever Set for Standard (Angled) End ? I noticed there are a few options for this hub.
Hi
Thank you for your enquiry, this hub is supplied to us with HSJ932 Fulcrum Lever Set for Reversed (horizontal)/Vertical End.
Kind Regards. 29/01/20
If I get this, can I re-fit this into a 28 hole hub shell? Thanks.
By
20 Jul 2019
If the shell is an RS-RF3 shell yes.

Thanks - 22/07/19