Home > Wheels > Hubs Internal Hub Gear / Brake > Sturmey Archer Cassette / Freewheel Hubs

Sturmey Archer X-RD Drum Brake Hub for use with Screw-on Multiple Freewheel - 36 Hole

Be the first to review this product

£84.99

was

View supersize image

£84.99 was

Manufacturer :

SJS Cycles part number :

Manufacturer part number :

Details

Rear thread on freewheel hub with 70 mm drum brake

Hub Shell Material: A356 Aluminium
Bearing Type: Sealed Cartridge
Axle Diameter: 9 mm
Axle Length: 183 mm
Over Locknut Dimension: 119 mm
Right Axle Protrusion Length: 31 mm
Left Axle Protrusion Length: 17 mm
D-Dimension: 31 mm
Spoke Holes: 36
Pitch Circle Diameter: 89.8 mm
Centre to Flange Right: 27.8 mm
Centre to Flange Left: 36.4 mm
Flange Width: 56 mm
Spoke Compatibility: 13g or 14g
Weight: 835g

Product Reviews (0)

Questions & Answers (6) Q & A

Specification

Downloads

Download File

Be the first to write a review

Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.

Questions & Answers (6)

Size rear hub

By Dave

25 May 2021

Does It work with 140 mm rear frame space?

SJS Customer Service:

Thank you for your enquiry, this is for 135mm spacing

For single speed use

By Simon Ward

19 Oct 2020

Can I fit a single-speed freewheel to this multiple freewheel hub, and respace to around 126mm. The single-speed version of this hub has an OLN of 119mm and the axle is too short for my frame. Both hub shell bodies look identical, is it just the axles which are different lengths?

SJS Customer Service:

I'm afraid not as this will not accommodate the torque arm for the brake.

Thanks,

JK 20.10.20

Replacement axles

By Anonymous

06 Aug 2020

Hello

Thinking about some new wheels for my winter training bike. This would be a nice low maintenance option, but I am worried about the quality of replacement axles. It seems freewheels have been forgotten these days.

Do any of the Wheels Manufacturing axles fit this hub?

SJS Customer Service:

The replacement is -SJS Cycles part number : 19231
None of the WM axles fit.

Thanks - 07/08/20

is this product a rear hub or front hub? is it possible to be installed as a front hub?

By Anonymous

11 Jan 2019

SJS Customer Service:

This is a rear hub, you may be able to use it as the front though.

Thanks - 14/01/19

Re-Spacing The X-Rd

By Valerio

25 Jun 2016

Hi, do you think it would be possible for me to experiment with different size spacers to obtain enough room for a 5 speed (or 7 ideally) freewheel and keep it to about 126-127mm? From the diagram in the technical docs you link here it would seem doable... Thanks!

SJS Customer Service:

Hi,

Although in theory it should be possible to change the spacers, as these hubs are designed around a 135mm I doubt you will be able to reduce it to 126/127mm I'm afraid.

Thanks.

Tandem Drum Brake Week Build

By David Stewart

22 Oct 2015

Hi, Im thinking about retrofitting a drum brake to an Orbit Gemini tandem. Its about 20 years old and has centrepull brakes and a 7 speed screw on freehub at present, with a 3 ring chainring up front. Based on this SA hub, the Rigida RM19 rip and a wheel build I make this out to about £170. I'd need to add a brake lever and cable for the the stoker to operate the brake from the back seat. What I'm wondering is how feasible this is ... in particular can you advise on how the cable routing would work as obviously at present there is no baze on or bracketry to secure the cable on the frame and unless this can be accomodated the ideas a nonstarter

SJS Customer Service:

Hi,

The hub comes with a chainstay clip for securing the brake arm and the cables can be secured using clamp on cable guides, you will need to check the diameter of the tubing to make sure you get the correct size but the one we recommend are SJSC part 37775. The only other thing you'll need to check is the rear hub spacing of your frame as this hub is 135mm wide within the dropouts. Other than this you should be fine fitting this hub to your tandem.

Thanks.