RevoLoop Fat Lightweight 40mm Presta Tube 26" Tyres - 3.8" to 5.00" - 96-559 to 127-559

The REVOLOOP.fat was developed by us as a lightweight tube for fat bikes with jacket widths from 3.8 to 5 inches. With a weight of only about 160 grams in the 26 inch version, it reduces the moving, rotating mass on the wheel by about 250 grams per wheel compared to conventional butyl tubes, making the bike more agile. At the same time it convinces by an increased flank stability and brings you safely through demanding curves. Despite its lightweight, this tube has high puncture and snakebite resistance. This ensures purcture resistance and safety on the trail. The material formulation specially developed for this tube combines a very high mechanical strength with simultaneous elasticiity of the material and thus enables the innovative, specific property profile of this bicycle tube.

The valve is made of particularly impact- and break-resistant thermoplastic material and is ahead of its time. Minimum weight coupled with maximum performance. A specially designed valve foot prevents damage to the hose due to sharp edges on the valve bore. The tough plastic minimizes valve breakage during the toughest trails with low air pressure.

- ETRTO: 96 - 127 / 559
- Inch: 26 x 3.8 - 5.00
- Presta Valve: 40mm

IMPORTANT: Please never fill your REVOLOOP hose with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.