RevoLoop MTB Ultra Lightweight 40mm Presta Tube 29" Tyres - 1.6" to 2.4" - 42-622 to 60-622
£23.99
was
£23.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
The REVOLOOP.mtb ultra is the challenge to steep climbs and was trimmed by us for lightweight construction, which is reflected in a product weight of only 45 grams. Due to its low weight, it saves about 100 grams per wheel, which makes starting and climbing less strenuous. The material formulation specially developed for this tube combines a very high mechanical strength with simultaneous elasticity of the material and thus enables the innovative, specific property profile of this bicycle tube.
The valve is made of particularly impact- and break-resistant thermoplastic and is ahead of its time. Minimum weight coupled with maximum performance. A specially designed valve foot prevents damage to the hose due to sharp edges on the valve bore. The tough plastic minimizes breakage during the toughtest trails with low air pressure.
- ETRTO: 42-60 / 622
- Inch: 29 x 1.6 to 2.4
- Presta Valve: 40mm
IMPORTANT: Please never fill your REVOLOOP hose with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.
The valve is made of particularly impact- and break-resistant thermoplastic and is ahead of its time. Minimum weight coupled with maximum performance. A specially designed valve foot prevents damage to the hose due to sharp edges on the valve bore. The tough plastic minimizes breakage during the toughtest trails with low air pressure.
- ETRTO: 42-60 / 622
- Inch: 29 x 1.6 to 2.4
- Presta Valve: 40mm
IMPORTANT: Please never fill your REVOLOOP hose with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.
Specification
Downloads
Download File
Related products
RevoLoop Puncture Repair Kit
£7.99 Inc VAT
Quick view
Mavic Rim Valve Hole Drilling Converter Insert - Schraeder to Presta
£1.49 Inc VAT
Quick view
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).