SON Headlight Bracket for Delux - Milled - 31.8 mm Clamp
£24.99
was
Colour
£24.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Headlamp bracket for Schmidt edelux.
Schmidt finally solves the problem of headlights for assembly on modern handlebars with up to ø31, 8 mm, especially for road bikes and mountain bikers there is now an ideal mounting soloution for the headlamp.
Handmade by Schmidt in Tübingen available in polished aluminum or anodized black.
Fits ø22.2-31.8mm
Schmidt finally solves the problem of headlights for assembly on modern handlebars with up to ø31, 8 mm, especially for road bikes and mountain bikers there is now an ideal mounting soloution for the headlamp.
Handmade by Schmidt in Tübingen available in polished aluminum or anodized black.
Fits ø22.2-31.8mm
Specification
Downloads
Download File
Related products
SON Tensioning Straps for Delux Bracket - Pack of 5
£6.99 Inc VAT
Quick view
Product Reviews (10)
Overall Product Rating 4.8 / 5
By Richard
18 Jul 2024
5 / 5
I recommend this product
it looks nice
Good, not perfect
By Tim
11 Aug 2023
4 / 5
I recommend this product
ConsRequires T20 to secure, not simple to swap between bikes
ProsQuality build, secure fit, position options
Quality product, secure fit but 2 shortcomings as I see it.
1-Torx (not T25 found on most multitools but T20) to fit to bars. Hex would be better. If it came loose (unlikely) or got dislodged I'd be stuck to without a T20 tool. I'm going to look for hex bolt to fit instead.
2 - No simple swap between bikes as metal strip is formed during fitting - likely need new strip (spares available I think?) if removed. Strip means it may not be suitable for bars that aren't round section. Perhaps a flexible section fitted into metal hooks either end would fix this - I may try a hack.
There are position options - can be rotated backward to place light slightly higher & further back to illuminate computer at night (saving charge by not running screen light) & might be better if you run a bar bag.
Probably also would mount to stem - can be secured at 90deg to position in photos.
1-Torx (not T25 found on most multitools but T20) to fit to bars. Hex would be better. If it came loose (unlikely) or got dislodged I'd be stuck to without a T20 tool. I'm going to look for hex bolt to fit instead.
2 - No simple swap between bikes as metal strip is formed during fitting - likely need new strip (spares available I think?) if removed. Strip means it may not be suitable for bars that aren't round section. Perhaps a flexible section fitted into metal hooks either end would fix this - I may try a hack.
There are position options - can be rotated backward to place light slightly higher & further back to illuminate computer at night (saving charge by not running screen light) & might be better if you run a bar bag.
Probably also would mount to stem - can be secured at 90deg to position in photos.
By Andy S
24 Mar 2021
5 / 5
I recommend this product
Beautifully made. Excellent look. Very strong. Simple to attach. Great product. Love it
Really nice product.
By Nick
31 Dec 2020
5 / 5
I recommend this product
ConsNeeds a Torx bit to tighten.
ProsVery well made and easy to fit.
Really nice product, easy to fit and perfect for the Son light I’m using.
Excellent product - fit - detail work
By James Thurber
25 Oct 2017
5 / 5
I recommend this product
ConsA sloppy hand could mess up the installation.
ProsBeautifully built / finished.
Although I was concerned about the flexible mounting strip it worked perfectly. It securely holds the light in place perfectly (and firmly). Five stars in all regards.
Does the job
By Rob John
06 Aug 2017
4 / 5
I recommend this product
ConsPricey for what it is
ProsPerfect
Item arrived promptly and as described. It's a perfect compliment for the Schmidt Edelux
Great Little Bracket
By Anonymous
18 May 2017
5 / 5
I recommend this product
ConsMaybe a tad pricey but good quality
ProsRotational adjustment
Compact bracket that is easy to fit and rotates to center the beam. Looks good with a Supernova Pro E3.
Geez...It'S Small!
By Kevin in Aus
30 Aug 2016
5 / 5
I recommend this product
ConsNone, except (possibly?) cost.
ProsSolid, secure fit, looks good, works.
But that's good! Smaller than I expected but looks good, works well, fits easily and appears durable (too early to actually say, yet). Typical Schmidt quality.
Works Well
By Anonymous
13 May 2015
5 / 5
I recommend this product
ProsLeight weight, secure
Diminutive bracket, well engineered. Just make sure not to cut strap too short :)
Review Of Schmidt Headlight Bracket For Edelux
By Anonymous
22 Apr 2011
5 / 5
Its looks match the lamp. It works very well but it is expensive.
Questions & Answers (11)
Would this bracket fit a front rack with a diameter of 15mm?
By Jon
21 Jun 2023
ie can it be
SJS Customer Service:
Hello & thank you for your enquiry.
Schmidt bracket to solves the problem of headlights for assembly on modern handlebars / racks with up to ø31, 8 mm.
As the bracket is designed to fits of 22.2 - 31.8mm I would not recommend attachment to rack of 15 mm diameter.
Kind regards, PC 21/6/23.
Schmidt bracket to solves the problem of headlights for assembly on modern handlebars / racks with up to ø31, 8 mm.
As the bracket is designed to fits of 22.2 - 31.8mm I would not recommend attachment to rack of 15 mm diameter.
Kind regards, PC 21/6/23.
Can I use this with edelux 2, thanks
By Nick stronge
24 Jun 2022
SJS Customer Service:
Yes you can,
JK 27.06.22
JK 27.06.22
Can i use instead of the one-light-holder to fix light to the carbon downtube of my Trek Domane
By Glyn Jones
20 Nov 2020
https://www.sjscycles.co.uk/lighting-spares/additive-spacer-one-light-holder/
SJS Customer Service:
We would not recommend this- and cannot confirm fitting as we have never fitted one to the down tube of a Trek Domane.
JK 23.11.20
JK 23.11.20
Can the clamp be adjusted to fit a tube of 20mm diameter
By Tim
30 Jun 2020
SJS Customer Service:
Yes, it can be adjusted all to this size
son head light clamp
By Louis Barnard
12 Apr 2019
hello can i get a replacement strap ?
SJS Customer Service:
Hi
Thank you for your enquiry, the replacement straps are available for this bracket on our part number 45903. You can input this number in to the search box & it will take you straight to it.
Regards. 16/04/19
Thank you for your enquiry, the replacement straps are available for this bracket on our part number 45903. You can input this number in to the search box & it will take you straight to it.
Regards. 16/04/19
Schmidt Headalight bracket for deluxe milled 31.8 mm clamp
By Rob
28 Apr 2018
Hi , can this Schmidt headlight bracket be mounted on top the handle bar stem so as to be central on the bike.The strap would have to be rotated 90 degrees to pass under the handle bar stem Thanks
SJS Customer Service:
Hi there,
As long as your stem is less than 31.8mm in diameter then this will fit fine.
Thanks
As long as your stem is less than 31.8mm in diameter then this will fit fine.
Thanks
Supernova E3?
By Christopher McCarthy
30 Nov 2017
will this mount work with a Supernova E3 headlight?
Thanks!
Thanks!
SJS Customer Service:
Hi,
Yes your light should mount with no issues.
Thanks
Yes your light should mount with no issues.
Thanks
Fitting Under Stem At 90'
By Anonymous
04 May 2017
Would I be able to fit this upside down under the stem? That would require turning the fitting another 90 degrees. Many thanks.
SJS Customer Service:
Hello,
This should not be a problem, however we have not tested so cannot know for sure.
Thanks.
This should not be a problem, however we have not tested so cannot know for sure.
Thanks.
My Handlebars Are 10Cm Around Would This Product Fit My Bars
By robert mcmillan
30 Oct 2016
SJS Customer Service:
Hi,
A circumference of 10cm gives a diameter of 31.8mm so this bracket should fit your handlebars fine.
Thanks.
A circumference of 10cm gives a diameter of 31.8mm so this bracket should fit your handlebars fine.
Thanks.
Width
By Frank
07 Apr 2014
Hi Sorry to be a pain but I don't suppose you know the width of the clamp which attaches to the light itself? As in inside to inside where the lamp sits? I was hoping to use for my dosun U1 light
SJS Customer Service:
Hi,
No worries, this distance between the two inside edges is 10.5mm.
Thanks.
No worries, this distance between the two inside edges is 10.5mm.
Thanks.
Can I Fit A B&M Luxos Light Onto Your Part No 23929S?
By Rob Wormald
21 Nov 2013
I am unable to use the B&M bracket supplied as the cable stops on my Serotta are on the sides of the head tube, resulting in the the cables being too close together to allow me to fit the lamp. So I am proposing to use a handlebar bracket, but I cannot find any made by B&M. The Schmidt one looks suitable, if the B&M lamp will fit in it.
SJS Customer Service:
Hi,
Yes your Busch and Muller light can be fitted to and used with the Schmidt handlebar bracket.
Thanks.
Yes your Busch and Muller light can be fitted to and used with the Schmidt handlebar bracket.
Thanks.