Busch & Muller Lumotec IQ Cyo E 80 Lux E-Bike Headlight

The new Lumotec IQ Cyo E Premium E-Bike light from Busch & Muller incorporates all of the best features of the dynamo model but is designed to work with most E-Bike systems currently on the market. It can be connected to all DC power sources supplying between 6 and 42V DC. The 80 lux output creates a far reaching, wide and evenly lit beam pattern ideal for faster moving E-Bikes. The Cyo E has an inbuilt on/off switch as not all systems can be independently switched at the console of the battery.

The Cyo E has an inbuilt converter that generates a 6V DC output designed to work with specially designed E-Bike rear lights from B&M. It is possible to run standard rear dynamo lights with the Cyo E however please note that the stand light function will remain on after the E-Bike system is turned off.

For use with E-Bikes only.

- Can be connected to all DC power sources supplying between 6 and 42V DC i.e. most E-Bike systems currently available
- 80 Lux output
- Incorporates an integral on/off switch
- Incorporates a converter that generates a 6V DC output intended to supply the E-Bike rear lights
- Regular dynamo lights can be used with this front E-Bike light
- Supplied with a twin cable which is hard wired into the light ready to be attached to the battery
- Cannot be dynamo driven

Please note the following recommendations from Busch & Muller if you are planning to install your own E-Bike lighting system:
- Establish and/or measure the voltage on the cables or connecting point intended for the connection. Make sure this is within the parameters of the light specification
- Establish and/or measure the polarity of the above mentioned connection and make sure to connect respectively to the correct pole using the instructions and/or the +/- signs on the light
- If you are not able to establish either of the above, or are not sure then please refer to your local electric bike specialist to install the lights for you