Busch & Muller Cyo IQ Premium T Senso Plus Headlight for Hub Dynamos
£99.99
was
£99.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
The Premium models offer the unprecedented large-area light field with a light intensity of 80 lux.
Under the main headlights are light striking LED dots, arranged in one or more rows. These are exclusively designed to signal other road users.
Traffic regulations requirements are always met - even in day mode because the headlight is then dimmed to the minimum requirement of traffic regulations.
Sidelights: Two of the signal LEDs take over the parking light function. Better than previous lighting solutions that are not aligned as signalling, but down on the road.
Under the main headlights are light striking LED dots, arranged in one or more rows. These are exclusively designed to signal other road users.
Traffic regulations requirements are always met - even in day mode because the headlight is then dimmed to the minimum requirement of traffic regulations.
Sidelights: Two of the signal LEDs take over the parking light function. Better than previous lighting solutions that are not aligned as signalling, but down on the road.
Specification
Downloads
Download File
Questions & Answers (8)
What does the "T" refer to compared to the IQ premium ?
By Ian king
09 May 2023
SJS Customer Service:
Hi
Thank you for your enquiry. The day light running models from B&M are denoted by the letter T in the name. These utilise B&Ms unique Licht24 technology which allows bike riders to be seen better by other road users in the daylight.
Kind Regards. JP 10/05/23
Thank you for your enquiry. The day light running models from B&M are denoted by the letter T in the name. These utilise B&Ms unique Licht24 technology which allows bike riders to be seen better by other road users in the daylight.
Kind Regards. JP 10/05/23
Can this replace the standard Brompton lamp?
By Abar
16 Jun 2021
Can this replace the standard Brompton lamp? Is this compatible with the Shimano hub on a Brompton ie re: electrical connectors and bracket? Also does this light have a manual on/off switch or is it wholly reliant on the sensor for switching?
SJS Customer Service:
Yes, this can be used, you just need to swap the plastic connector over for the hub. You will need to use the original bracket. This has a switch to control the settings.
Thanks - 17/06/21 RH
Thanks - 17/06/21 RH
Are the connectors compatible with a Son 28 hub?
By Rich
26 Mar 2021
SJS Customer Service:
YES- however, you will need 4.8mm spades to connect this to a SON hub- SJS part: 2870
Thanks, 29.03.21
Thanks, 29.03.21
Can you fit a longer cable ?
By Stephen Grant
09 Mar 2020
SJS Customer Service:
There would be nothing stopping you extending the cable, we would use a Sinewave connector.
Thanks - 10/03/20
Thanks - 10/03/20
Cable length
By Kevan
02 Oct 2019
How long is the fitted cable to connect to the dynamo hub?
SJS Customer Service:
Hi there,
The cable attached to the light is approximately 68cm.
Thanks.
The cable attached to the light is approximately 68cm.
Thanks.
Are the connectors compatible with a SP PD-8 hub?
By Douglas
26 Feb 2019
If not can you recommend a good quality compatible headlight unit for the SP PD-8 hub.
Thanks.
Thanks.
SJS Customer Service:
Yes this is compatible, the hub requires bare wires.
Thanks - 26/02/19
Thanks - 26/02/19
What Actually Does This Light Do?
By Anonymous
16 Nov 2016
I don't understand the description under "Details". The first sentence is fine - the rest seems to be gibberish. Please clarify. Perhaps you should supply the original German - it may be clearer.
SJS Customer Service:
Hi,
The important information is that there is an 80Lux output using B&M's IQ-Tec lens to give a bright well spread light. The lower mounted LED's in a row are specifically for the purpose of standing out to other road users especially from the side on. The light pattern has sharp cut offs to give maximum light onto the road surface.
Thanks.
The important information is that there is an 80Lux output using B&M's IQ-Tec lens to give a bright well spread light. The lower mounted LED's in a row are specifically for the purpose of standing out to other road users especially from the side on. The light pattern has sharp cut offs to give maximum light onto the road surface.
Thanks.
Fitting
By Mo
20 Jul 2015
Dear Sir/Madam
I have a Viking Keswick 2015 and would like to mount this light either onto the crown or the handlebars, in both instances which fittings/extensions would you be able to supply for this light?
Regards
Mo
I have a Viking Keswick 2015 and would like to mount this light either onto the crown or the handlebars, in both instances which fittings/extensions would you be able to supply for this light?
Regards
Mo
SJS Customer Service:
Hi,
This light comes as standard with a bracket for fitting to the fork crown. Handlebar brackets are available as separate items and these are SJSC part number 33640.
Thanks.
This light comes as standard with a bracket for fitting to the fork crown. Handlebar brackets are available as separate items and these are SJSC part number 33640.
Thanks.