Sinewave Cycles Taillight Rack Mount Adapter

- An adapter allowing the Sinewave Taillight to be used with a standard rack mount.
- 4 M5 holes in the centre allow the Taillight to be installed at any 90 degree alignment for easy wire routing.
- 2 outer M5 holes match the common 50mm spacing of rear racks.

Included:
- Rack Mount Adapter
- 2 x M5x6mm bolts to attach the Taillight to the adapter
- 2 x M5x16mm bolts to attach the adapter to rack
- 2 x M5 nuts
- 2 x M5 spacers

Installation:
- Use the M5 x6mm bolts to attach the Taillight to the adapter. Use whichever holes allow for best wire routing for your setup.The light output is symetrical so the visisbility of the light is not affected by the orientation.
- Use the M5x16mm bolts and nuts (if needed) to attache the adapter to the rack. Use the spacers to allow for clearance of the bolt heads from the previos step.