Carradice SQR Saddlebag Uplift System
£29.99
was
£29.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Complete with block and frame. This mounts quickly & easily to the bike's seatpin with 2 steel bands, allowing greater support and security for the saddlebag being carried.
It also places the bag further away from the saddle rails, so the back of your legs are less likely to brush up against the back of the bag when cycling. The frame is detachable and is removed along with the bag.
Dimensions: Overall height of plastic block 100mm, clamps need 49mm of exposed seatpost.
Will work with all current Carradice saddlebags.
Fits 26 - 32mm seatposts.
It also places the bag further away from the saddle rails, so the back of your legs are less likely to brush up against the back of the bag when cycling. The frame is detachable and is removed along with the bag.
Dimensions: Overall height of plastic block 100mm, clamps need 49mm of exposed seatpost.
Will work with all current Carradice saddlebags.
Fits 26 - 32mm seatposts.
Specification
Downloads
Download File
Questions & Answers (6)
How to select band type?
By Anonymous
16 Feb 2023
On Carradice website they require to select Standard/Large Bands. How can I do it here?
SJS Customer Service:
Our mounts are supplied with the standard clamps, if you need item 40466 if you have a 32-40mm seat post SK 16/02/23
Do i need an metal seatpost or can i use carbon ?
By Bill Simmons
08 May 2019
SJS Customer Service:
Hi there,
We would say that you need a metal seatpost, however as we have never fitted this to a carbon one we cannot say whether this would work or not I'm afraid.
Thanks.
We would say that you need a metal seatpost, however as we have never fitted this to a carbon one we cannot say whether this would work or not I'm afraid.
Thanks.
Will this suit and support the Pendle saddle bag?
By Keith
05 Feb 2019
SJS Customer Service:
according to Carradice: "Will work with all current Carradice saddlebags."
many thanks
06/02/19
many thanks
06/02/19
What diameter seatpost is this compatible with?
By Gary
02 Aug 2017
26 to 32mm
Is This Compatible With A Sprung Saddle?
By Scott
24 Aug 2016
Can this be used with a Brooks Flyer sprung saddle and Carradice Barley saddlebag? The Bagman QR doesn't fit saddles with springs, but does this? I'd like something that puts the saddlebag far enough back to keep it from brushing my thighs, allows the saddlebag to be removed fairly easily, and sits lower than the Carradice classic saddlebag rack.
SJS Customer Service:
Hi,
As long as you have enough seatpost available for the clamp to keep it low out of the way of the springs then you should be okay to use this with a sprung saddle.
Thanks.
As long as you have enough seatpost available for the clamp to keep it low out of the way of the springs then you should be okay to use this with a sprung saddle.
Thanks.
Carradice Sqr Support
By Ron Nairn
31 May 2015
Can you tell me how much of the seatpin requires to be shown for the support to be attached or tell me how long is the block side that bands onto the seatpin? Thanks.
SJS Customer Service:
Hi,
The actual clamping section is only 50mm long, but the overall length of the block is 100mm. The bottom 30mm is offset so you could get away with having as little as 70mm of available seatpost.
Thanks.
The actual clamping section is only 50mm long, but the overall length of the block is 100mm. The bottom 30mm is offset so you could get away with having as little as 70mm of available seatpost.
Thanks.