Wolf Tooth B-RAD Pump Bag - 1.9 Litre
£49.99
was
£49.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
This low-profile Pump Bag is named for the 12-inch pump it can carry comfortably but that's just the beginning. The bag is large enough for a pair of 29er tubes or lightweight jacket, wallet and even a cell phone. The Pump Bag has four mounting grommets that mate with the B-RAD 3 or 4 base, frame water cage bosses, or top tube fuel tank bosses. It can also be strapped to most frame tubes using the included silicone-backed hook & loop straps.
Compatibility:
- Can be mounted directly anywhere there are bottle cage mounts
- For the most secure and adjustable mounting, use a B-RAD 3 or 4 Base
- If mounting directly to frame bottle cage mounts, be sure to use protective tape where the metal grommets (holes) might rub
- Can be mounted to most tubes on the frame with the included silicon backed straps
- Holds pumps up to 12 inches or 30cm long with room to spare for tubes, phones, tools, clothing and other ride essentials
- Note: always check for appropriate clearance under all riding conditions including under full compression on a dual suspension
- Hardware included is T25 Torx head
Tech Specs:
- Weight: 114g
- Dimensions: 12 x 2.5 x 2.5 inch (30 x 6.5 x 6.5cm) / 1.9 liter capacity / Silicone-backed straps fit tubes up to 2.5 inches in diameter
- Material: PVC backed 420D ripstop nylon for added protection against the elements, water resistant YKK zipper, silicone-backed straps
- Included: Mounting hardware
- Tools Needed: T25 Torx
- Torque: 3-4Nm
- Made in the USA
Compatibility:
- Can be mounted directly anywhere there are bottle cage mounts
- For the most secure and adjustable mounting, use a B-RAD 3 or 4 Base
- If mounting directly to frame bottle cage mounts, be sure to use protective tape where the metal grommets (holes) might rub
- Can be mounted to most tubes on the frame with the included silicon backed straps
- Holds pumps up to 12 inches or 30cm long with room to spare for tubes, phones, tools, clothing and other ride essentials
- Note: always check for appropriate clearance under all riding conditions including under full compression on a dual suspension
- Hardware included is T25 Torx head
Tech Specs:
- Weight: 114g
- Dimensions: 12 x 2.5 x 2.5 inch (30 x 6.5 x 6.5cm) / 1.9 liter capacity / Silicone-backed straps fit tubes up to 2.5 inches in diameter
- Material: PVC backed 420D ripstop nylon for added protection against the elements, water resistant YKK zipper, silicone-backed straps
- Included: Mounting hardware
- Tools Needed: T25 Torx
- Torque: 3-4Nm
- Made in the USA
Specification
Downloads
Download File
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).