SKS Long Mudflap

I recommend this product

They are exactly what I wanted. Fitted them using epoxy p[lus the supplied fixing to make sure the would not drop off. My friends behind me now stay clean and so does my crank (I fitted front and back guards)
Highly recommend them. Excellent product

I recommend this product

The original set of Mudguards had lasted in excess of ten years, but were looking a little scruffy. The replacements are the usual excellent SKS quality and were pretty straightforward to fit. As always SJS had what I needed in stock, packaged and dispatched quickly! Outstanding service.

I recommend this product

Cheap, light, easy to fit and it makes a big difference to the amount of water leaking onto your shoes from the front mudguard. There's no reason not to fit this.

I recommend this product

Keeps rain and muck away from the panniers. Works well.

I recommend this product

Quality product that is easy to fit from a quality company. Keeps things dry and adds a touch of quality to the look of the bike. Great value.

I recommend this product

Brilliant cheap extender keeps the muck on the road

I recommend this product

Perfect fit on the SKS AL56 front guard. Drill 5mm hole using the flap as a drill giude. Plastic screw works, doesn't need to be super tight, but time will tell and I may add glue to the threads or substitute with a steel bolt if it loosens. This SKS AL 56 mm front guard is far too short as standard and should be sold with this extender flap and the option of removing it, rather than the other way round!

I recommend this product

Stylish & Easy to Fit

I recommend this product

Good strong & well made.
easy to fit. stays in place, have used these for years on other bike never had a problem still goong strong.
These i have bought for new bike, without hesitation.

I recommend this product

Well designed, effective and easy to fit although plastic screw not the best (I glued it in to ensure tightness).

I recommend this product

Well designed and effective. The fixing screw is just over 5mm so a 5.5 or 6mm drill should be used to make the hole in the mudguard. The screw is plastic so only tighten it until it feel firm. Treating it like a metal screw will only strip it.
Don't forget, the width of your mudguard is measured straight across - don't wrap your tape around the curve or you'll get totally the wrong size.

I recommend this product

Easy to use. I don't used the screw.

It does seem to reduce rain spatter. The fixing was harder than expected as I had to trim the end of the mudguard and the plastic fixing screw stripped as soon as I tightened it.

I recommend this product

Product well made and instructions to fit are easy to understand and implement. I bought one of each size and fitted them both in 5 minutes, one to my tandem and one to my road bike. SJS website very good with information and help. Good company in my opinion, good service, guards arrived in 48 hours.

I recommend this product

Good quality mud flap at very reason.able price. Excellent seller

I recommend this product

I've had the narrow SKS mudflap on my commuter for four years and it's still solid. This very wide one (I bought 50-60mm) has gone on my cargo bike. Pretty easy to fit if you have a drill. My 60mm guard is right on the limit (perhaps beyond it) for this size. It's a very tight sqeeze.

I recommend this product

Bought to renovate 20 year old SKS guards fitted very well, given the guards a new lease of life sturdy well made product

I recommend this product

I have a two bikes Tern with 20 inch wheels.
These mudflaps - super. Excellent protection against dirt. Easily and quickly installed on the mudguards.

Excellent value and quality.

I recommend this product

What a superb extension to my front mudguard,non more wet feet and bike a lot cleaner,excellent product from a proper cycle retailer,will be getting one for the rear now,thanks Dave.

I recommend this product

Excellent service and product

I recommend this product

It took me a very long time and a lot of seaching google to find these mudflaps. They fitted perfectly and do exactly the job they are for.

I recommend this product

The chrome plastic mudguards that Halfords fitted to a new bike with 700C wheels proved to be to short and failed to eliminate the spray from the rear wheel. The SKS Long Mudflap proved to be the perfect solution to gain that extra length of guard extension over the entire wheel. Easy to install with a single drilled hole through the existing mudguard.

I recommend this product

Bought this to fit to some SKS mudguards on my 20- inch wheel folder. Easy to fit and works to stop the excess spray not captured by the mudguards from covering me on my commute. Well worth the asking price.

I recommend this product

These mud flaps are quite heavy, which causes the mudguards to vibrate and sometimes rattle and rub on the tyre. Mud and gunk buildup gets stuck on the inside on the mudflap as the transition between mudguard and flap is not seamless and the mudflap is quite thick which can cause a buildup of mud.

Plastic screw included is GARBAGE. Had to use my own M5 screws with washers and M5 nuts. The plastic screw threads are not strong and pop out easily, fall off and then get lost on the road.

Could be thinner and lighter to prevent excessive vibration.

I recommend this product

and are very comfortable in use

I recommend this product

I have a Raleigh Velo Cite pedelec bike with SKS mudguards fitted as standard. The rear has a short rubber mud flap but nothing on the front. Result was that the front wheel threw debris up over the bottom 10 inches of the front down tube and also onto the chain..... in spite of a partial chain guard. The only problem was which size to buy as SJS only supply the small and large sizes. My mudguard is 48 mm wide. I decided on the small one as I figured I could always reduce the width of the mudguard over the fixing length. In trying to fit the flap I split the thin rubber web on the tyre side of the flap. However it did now fit so I made up a support strip cut from a hard thin bottle of the same radius and simply put this behind the fixing washer. Job dome and it works perfectly. No more mud and grit. I think the large version would have been too sloppy so this is a good solution for medium size mudguards. I see that the 2013 version of my bike has an SKS long flap fitted as standard so perhaps SJS could be persuaded to stock the inbetween size too.

Summary. Great flap that does what is intended, easy to fit and solves a common problem at the right price.

I recommend this product

SKS Long MudFlap, Delivered very quick, Excellent product & good value.

I recommend this product

Super mud flap, fitting perfectly on my 50mm wide mud guards. Less spray and debris on my crankset, less spary on my shoes

I recommend this product

Flap excellent although narrower size would be good. A bit fiddly to fix when on bike and I replaced rivet with cable tie although two holes required for this

I recommend this product

At last I now have dry shoes & feet (almost) when riding through puddles and mud.
Easy to fit, once you have drilled a 6mm hole at the end of the SKS mudguard.
It does what it's supposed to very effectively, typical German design.

I recommend this product

Right, other than ordering the too narrow size for the intended bike this is a great mud flap. It holds its shape, so ideal for the back, particularly good if you guard is a bit short or you have a trailer.
Now there are no instructions, so what you need to do is drill a 6mm hole in the right place, with the flap in place insert the rivet, slip washer on the othr side and push the pin. job done

I recommend this product

These mudflaps are great, and were really easy to fit, even though mine are to big as i measusured the mudguard wrong, measure across the curve of the mudguard at the back with a straight edge, i measured the curve at the front hence to big, but still do a fantaastic job and no wet feet, well worth the money.

I recommend this product

Very nice mudflap. Makes your mudguards 10 cm longer, and your feet dryer. Drill a 6 mm hole and put the metal washer on the inside. Pretty simple.

I recommend this product

A perfect addition to my SKS mudguards, easy to fit, no fitting instructions but it not rocket science. The flap are slightly flexible, all in all a great product.

I recommend this product

SKS mudguard had lost original flap so required hole was there. Instructions for use of rivet would have helped but trial and error enabled a successful fitting. It has just survived five days of mud and heavy rain on TPT. Looks like a great product.

I recommend this product

Does what it's supposed to, fits easily, priced right and arrived quickly. What's not to like?

I recommend this product

As appears to be usual with SKS products it is well made, but comes with no fitting instructions, thankfully the previous reviewers above had worked it out for me.

Doesn't look too dorky. Though if SKS made their mudguards long enough in the first place these wouldn't be necessary.

I recommend this product

i driiled a 6mm hole thru mudguards quite close to the end of the mudguards as 5mm was too tight.easy fit with push thru rivets,mount the front mudflap as low as possible to catch the spray from the front wheel to keep your feet dry.well made and cheap so i bought two one for the front and one for the rear.older riders have diy mudflaps made from sauce bottles.oil cans and so on but by the time you buy a pop rivet gun to use once wots the point!most people got access to a drill so i would buy them everytime cause thats all u need to fit these mudflaps.10/10

I recommend this product

I fitted SKS Bluemels mudguards at end of summer, which are very good, but I still got wet feet in really heavy rain storms. I also wanted one for the rear to prevent spray annoying other riders.

As another reviewer said, the mudflaps came with no instructions, but SJS's product description helped. I drilled a 5mm hole in the mudguards, but had to make it a little wider with a rat tail file so the rivet could push through. I put the metal washer on the inside of the mudguards over the rivet. The pushpin was hard to push through, but I managed to get sufficient force by protecting my thumb with an old leather belt.

The fit is very tidy and seems secure. The front mudflap works excellently. A recent 4 hour ride on very wet roads and my feet were dry. Overshoes were only slightly damp on the outside, so my feet stayed warm.

I don't know how effective the rear mudflap will be, I suspect I may need a longer one. Will have to wait til I get fit enough to join local CTC to find out!

I recommend this product

Fit my Planet Bike mudguards nicely, looks tidy and does the job.

As mentioned there were no instructions on using the rivet.

My understanding is that it's a drive rivet, you push the rivet into the hole, place the washer over the rivet on the inside of the fender, then hammer the stalk of the rivet through into the centre of the rivet.

A bit fiddly if the fenders are attached to the bike.

I recommend this product

Just a pity there was'nt a 35 to 42 size for a narrow mudguard.

I recommend this product

No problems with fitting the mudflap,which is ideal for the purpose.