SKS Mudguard Fitting Kit
£14.99
was
£14.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Contains:
- 4 double stainless steel stays.
- 2 secu clips.
- 8 stainless steel draw bolts and 8 black plastic stay end caps.
Note: the stainless steel rear mudguard bridge must be ordered separately.
- 4 double stainless steel stays.
- 2 secu clips.
- 8 stainless steel draw bolts and 8 black plastic stay end caps.
Note: the stainless steel rear mudguard bridge must be ordered separately.
Specification
Downloads
Download File
Questions & Answers (13)
Half Sets?
By Peter
22 Apr 2022
I have a Mercury and would like to take the rear carrier off.
The existing mudguard stays are shortened and attach to the carrier. I will need some new stays but only for the rear wheel. Do you sell half Sets, that is, just the two stays by want chance? Thanks.
Peter
The existing mudguard stays are shortened and attach to the carrier. I will need some new stays but only for the rear wheel. Do you sell half Sets, that is, just the two stays by want chance? Thanks.
Peter
SJS Customer Service:
For any information or advice on any of Thorn bikes, frames and forks or parts, please contact our dedicated Thorn bikes sales team either on 01278 441505 or [email protected] and they'll be able to provide you with all of the information you need.
How long in mm are the stays in SKS Mudguard Fitting Kit? I need 350-360mm
By Jeffrey Haynes
30 Mar 2021
SJS Customer Service:
Thank you for your enquiry, they are 350mm long
WD 30/03/21
WD 30/03/21
I'm looking for these, but longer..
By Spoon
17 Jan 2021
I'm looking for these, but longer..
Say 40cm in length or more …
Any recommendations?
Thanks.
Say 40cm in length or more …
Any recommendations?
Thanks.
SJS Customer Service:
All of the SKS kits we do have stays of 350-360mm. we cannot confirm that other stays will be compatible with your guards if you're using SKS mudguards.
Thanks 20.01.21
Thanks 20.01.21
What's the diameter of the stays in this kit, 3.0 or 3.4 mm?
By Peter
15 Mar 2018
I ask as I want to purchase some spare secu clips at the same time.
SJS Customer Service:
Hi,
The stays in this kit are 3.4mm in diameter.
Thanks.
The stays in this kit are 3.4mm in diameter.
Thanks.
Length of stays
By Don
07 Feb 2018
My rear mudguards sometime scrap againt nobbly tyres and are already at the very end of the stays. So, I need longer stays. What are the length of these stays?
SJS Customer Service:
Hi,
The mudguard stays supplied in this SKS fitting kit are 350mm in length.
Thanks.
The mudguard stays supplied in this SKS fitting kit are 350mm in length.
Thanks.
compatible with widget mudguard
By guillaume
14 Jan 2018
Hi,
I have cut too short the V-stays of my Widget mudguard. Can you tell me if the SKS stays could be compatible?
best regards
I have cut too short the V-stays of my Widget mudguard. Can you tell me if the SKS stays could be compatible?
best regards
SJS Customer Service:
Hi there,
We do not have experience of swapping these stays so could not confirm,
Thanks
We do not have experience of swapping these stays so could not confirm,
Thanks
Will These Fit My Longboards?
By Gabriel
13 Mar 2017
Hi there,
I've lost some bolts for my SKS Longboard Mudguard Set, are these suitable?
Also on the 'details contains' section there is no mention of the black T shape plastic bits, are these also included in the kit?
Kind regards
I've lost some bolts for my SKS Longboard Mudguard Set, are these suitable?
Also on the 'details contains' section there is no mention of the black T shape plastic bits, are these also included in the kit?
Kind regards
SJS Customer Service:
Hi,
This kit is suitable for your SKS Longboard mudguards, the black t-shaped parts are the plastic stay end caps. Everything that is shown in the photo is included.
Thanks.
This kit is suitable for your SKS Longboard mudguards, the black t-shaped parts are the plastic stay end caps. Everything that is shown in the photo is included.
Thanks.
380Mm Sks Rear Mudguard Stays
By Richard
29 Aug 2016
Hi, I understand from sks customer services that they sell 380mm rear stays for blummels.
The part number is 0000008315-0380 (or 11123).
I notice you seem to have the 355mm versions, do you have the 380mm too please?
Thank you
The part number is 0000008315-0380 (or 11123).
I notice you seem to have the 355mm versions, do you have the 380mm too please?
Thank you
SJS Customer Service:
Hi,
Only the 355mm versions are available from SKS' UK supplier, so this is all we're able to get hold of I'm afraid.
Thanks.
Only the 355mm versions are available from SKS' UK supplier, so this is all we're able to get hold of I'm afraid.
Thanks.
What Length Are The Sks Mudguard Stays Please?
By Neil
17 Apr 2016
We have a tandem bike and have just fitted new tyres. The tyre depth is deeper than the originals, so the rear is rubbing on the mudguard. Fitting longer stays should hopefully resolve the problem.
SJS Customer Service:
Hi,
The mudguard stays supplied in this SKS fitting kit are 350mm in length.
Thanks.
The mudguard stays supplied in this SKS fitting kit are 350mm in length.
Thanks.
Will This Fit Tortec Reflector Mudguards
By Alex
26 Aug 2015
SJS Customer Service:
Hi,
Although this kit has not been designed for use with Tortec mudguards the construction of these stays is very similar to the ones used on your Reflector guards so they should serve as a suitable replacement.
Thanks.
Although this kit has not been designed for use with Tortec mudguards the construction of these stays is very similar to the ones used on your Reflector guards so they should serve as a suitable replacement.
Thanks.
Mudgaurd Stay Length
By Adam
29 Jul 2014
Hi Could you tell me if these are available in longer length than 350mm legnth?
SJS Customer Service:
Hi,
Unfortunately these are only available in this 350mm length.
Thanks.
Unfortunately these are only available in this 350mm length.
Thanks.
Sks Commuter Mudguard (45Mm) Fitings.
By Kam
06 Jul 2014
A few fittings have fallen off my front SKS commuter mudguard (45mm).
Can these be bought separately?
These are different to the ones shown in the picture, so I don't think these 'universal' fittings are the ones that I need (referring to answer to previous question 14th October, 2013).
I'm missing both of the nuts/bolts that connect to the guard end, one of the plastic housings that they sit in, and one of the Ushaped ends that keep the two spokes together at the guard end.
Hope you can help.
Thank you.
Kam Sanghera
Can these be bought separately?
These are different to the ones shown in the picture, so I don't think these 'universal' fittings are the ones that I need (referring to answer to previous question 14th October, 2013).
I'm missing both of the nuts/bolts that connect to the guard end, one of the plastic housings that they sit in, and one of the Ushaped ends that keep the two spokes together at the guard end.
Hope you can help.
Thank you.
Kam Sanghera
SJS Customer Service:
Hi,
We stock most of SKS' mudguard spares but don't have any specific sets for the SKS Commuter mudguards. The fittings you have left this question on are only universal in the sense they can be used on both 26" and 700C wheels which is what the question asked about. The nuts, bolts and secu-clips are all available separately, some of the u-shaped ends are available but without having a set of your mudguards here I don't know which will fit I'm afraid.
Thanks.
We stock most of SKS' mudguard spares but don't have any specific sets for the SKS Commuter mudguards. The fittings you have left this question on are only universal in the sense they can be used on both 26" and 700C wheels which is what the question asked about. The nuts, bolts and secu-clips are all available separately, some of the u-shaped ends are available but without having a set of your mudguards here I don't know which will fit I'm afraid.
Thanks.
Sks Mudguard Fitting Kit
By Anonymous
14 Oct 2013
Hi there,
Is the fitting kit for 700c or 26" mudguards please?
Thanks,
BenR
Is the fitting kit for 700c or 26" mudguards please?
Thanks,
BenR
SJS Customer Service:
Hi
The kit is universal fitting.
Thanks.
The kit is universal fitting.
Thanks.