Jtek Q+ Pedal Extenders 9/16 Inch
£14.99
was
Size
£14.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
No nonsense good quality pedal extenders from Jtek.
If you need a slightly more toe out foot riding position to relieve knee pain or to reduce heel rub on your crank arms try these pedal axle extenders.
- For 9/16 inch pedal threads
- Cr-Mo Steel
- Per Pair
Requires pedals that use a 15mm spanner for fitting. WILL NOT work with any pedals that fit only using an allen key from behind.
NOTE: Sizes in drop-down menu are measured in millimetres (mm)
Weight: 20mm = 100g / 25mm = 129g / 30mm = 159g
If you need a slightly more toe out foot riding position to relieve knee pain or to reduce heel rub on your crank arms try these pedal axle extenders.
- For 9/16 inch pedal threads
- Cr-Mo Steel
- Per Pair
Requires pedals that use a 15mm spanner for fitting. WILL NOT work with any pedals that fit only using an allen key from behind.
NOTE: Sizes in drop-down menu are measured in millimetres (mm)
Weight: 20mm = 100g / 25mm = 129g / 30mm = 159g
Specification
Downloads
Download File
Questions & Answers (6)
are the sizes 20, 25 and 30mm the length of the product or what it extends the pedals with
By simon
21 Apr 2023
SJS Customer Service:
Hi
Thank you for your enquiry. The 20, 25 & 30mm measurements in the listings refer to the actual extension itself & does not include the threaded section.
Kind Regards. JP 25/04/23
Thank you for your enquiry. The 20, 25 & 30mm measurements in the listings refer to the actual extension itself & does not include the threaded section.
Kind Regards. JP 25/04/23
Can these be used with carbon crank arms?
By Anonymous
08 Jun 2018
SJS Customer Service:
This should be fine with carbon arms as it is just the same as fitting a pedal.
Thanks
Thanks
Pedel spindle extender fitment with allen key pedals?
By Ian Good
26 Mar 2018
Is the only issue with allen key pedals the fact that there are no flats to tighten the pedal into the extender could i not just tighten with stilsons on the spindle ?
SJS Customer Service:
These will not fit allen key fitting pedals, without using a pedal spanner there is no way of knowing how tight the pedal is onto the adapter and certainly no chance of a torque measurement! It is also highly likely to damage the pedal.
Thanks
Thanks
Can these be used with shimano XTR pedals where there is only allen-key attachment?
By JP
23 Mar 2018
Can these be used with shimano XT and XTR pedals where there is only allen-key attachment, so is there a hole through the part?
SJS Customer Service:
Hi there,
You would have no way of securing the pedal into the extender without having the 15mm flats, so these would not work with those pedals.
Thanks
You would have no way of securing the pedal into the extender without having the 15mm flats, so these would not work with those pedals.
Thanks
Can The 20Mm Version Work With Ultegra 6800 Cranks
By Allen Horrigan
20 Jun 2017
Thanks
SJS Customer Service:
Hi, Yes they will work with any cranks with a 9/16 thread. Thanks
Hi, What Size Spanner Do I Need To Fit These?
By Andy
16 May 2017
SJS Customer Service:
Hi,
These pedal extenders require a 19mm spanner for fitting.
Thanks.
These pedal extenders require a 19mm spanner for fitting.
Thanks.