Pedal Reflectors - Pack of 4

I recommend this product

BS marked reflectors, good value - used built in holder on one bike and while bike other had different fitting style for holder I could just pop out the new reflector element and glue into the old empty holder.

I recommend this product

So much better than the ones which just push on with a plastic stud. These can be fitted front and back, because the bolts are strong enough to hold toeclips in place. Couldn't find them anywhere else.

I recommend this product

Good value, easy to fit, and solid construction. Some other pedal reflectors have plastic lugs to attach them to the pedal (which can snap) whereas these have metal bolts so they should stand the test of time.

I recommend this product

Couldn't find these anywhere locally and many online versions were clip on. These screw in reflectors were exactly what I was after and look good quality. The price was pretty amazing too.

I recommend this product

It is not always easy to get hold of simple bike parts like these screw-in reflectors. SJS is a treasure trove of hard to find items.

I recommend this product

I bought two sets of these for Wellgo cast metal pedals. The reflectors are of a universal type. The black plastic carrier has slots so that the fixing bolts can accommodate a variety of hole centres. Both my pairs of pedals have a 12mm recess to take a reflector. The black plastic carrier is much wider. I had to cut away the carriers and drill the reflectors (which ARE 12mm wide) to take the bolts.
A bit of a faff but a good cost-effective product.

I recommend this product

couldn't ask for better

I recommend this product

I couldn't find a local supplier of these, so I was pleased that they were easily obtainable from SJS at reasonable cost. They seem to be well made and have the bolt-on fitting, which I prefer.

I recommend this product

I fitted these reflectors to a pair of Wellgo M142 pedals on a previous bike 5/6 years ago.I was happy with the design and build quality and searched high and low to find more of the same.[I thought the manufacturers had stopped making them or replaced them with a different model].I have fitted the same Wellgo M142 pedals and finally found this type of reflector was available.They are a bit tricky to fit to the wellgo pedal but they look smart, are highly visible and do the job. Great design and good value

I recommend this product

Well made replacement with two bolts that can be adjusted to fit hole spacing on pedal between 18mm and 31mm, which means it will fit virtually any pedal. You need a flat open 7mm spanner to fit the item, failing which a small pair of pliers may do the job. Pedal reflectors are a legal requirement under the Pedal Bicycles (Safety) Regulations 2010.

I recommend this product

Needed to replace existing disintegrating reflectors. The rear pieces attached fine but the front two were unusable due to toe clip strengthener ribs so beware and check first.
Postage costs seem high for such a small and light item.

I recommend this product

Excellent in every respect.

I recommend this product

These are the about the only shop that supplies these
I needed some after mine fell off, they bolt on so should last longer good product quick delivery

I recommend this product

I didn't get any reflectors on my new bike, and despite people telling me it looked cooler without them as a stickler for legality (and for the night safety they provide) I needed to find a set of these. They fit the bill and are of good quality. I would have paid a bit more for stainless steel bolts and nuts, but these were easy enough to fit and will hopefully last well.

I recommend this product

Well made, adjustable and easy to fit.

I recommend this product

As i expected did the job perfectly.

I recommend this product

Well done SJSC for selling pedal reflectors. Not many bike shops appear to sell them. I once got a funny look from a shop assistant when I asked if they sell pedal reflectors, which I think is a bit poor considering they are a legal requirement at night time, and it is a tall order expecting them to last the life of the pedals as they inevitably get bashed. My only concern is that the bolts are only just long enough to attach toe clips, and that's without using any washers. This is the reason for me not giving five stars all around. They are certainly not the longest bolts I have seen in pedal reflectors. Depending on the pedals and the toe clips that you are using, you might need to prize out the orange lens with a knife and put longer bolts in.

One review said “Very easy to fit. Very adjustable. Very reflective. What's not to like?”

That’s spot on. Nice price too, and ones that screw on should be less likely to break off than the ones that clip in place.

I recommend this product

The existing factory fitted reflectors had fallen off the pedals on my Trek 7.2, so got these as a replacement. They bolted on easily in a couple of minutes and fit fine. Very please with them and the

I recommend this product

Fiddly but easy to fit if you have a small spanner. I needed to ask the question about the bolt width adjustment range, so it would be useful to have that included in the description.
The reflectors seem quite solid and chunky though this means they do stick out a bit (i.e. with the pedal horizontal, adds about 1 inch to the pedal length front to back) and this may make them prone to being caught when putting your foot on and off the pedals if you don't use footclips.
Well worth having to increase visibility and they are a legal requirement for cycling at night I believe.
Postage costs seem a bit high though not ridiculous like some vendors.

I recommend this product

I fitted these to Wellgo alloy flat MTB pedals. They fit securely, although their width does mean that they stick out a bit from the edges of the pedals. So far this hasn't made any difference to the pedalling.
Very useful if you use a bike for commuting after dark but still want to have high end pedals (which don't normally come with reflectors).

I recommend this product

Very easy to fit. Very adjustable. Very reflective. What's not to like?

Got these to replace original push in reflectors which were coming adrift.
Adjustable fit made them easy to use and secure.

I recommend this product

Just what I wanted after original reflectors (which were just clipped in place) came loose. My local shop no longer sells reflectors separately but good old SJS came up trumps. Many thanks

Got these to fit to Shimano M324's. They fit just fine, as the bolts slide to accommodate different spaced mountings. Once on though, you can't easily adjust the tensioners. Other than that worked a treat, a lot cheaper than the official Shimano reflectors and much more readily obtainable.

They will do the job well enough and good value. I strongly recommend that the adjustment limits be shown on the product packaging and the website. (19mm to 32mm between centres)

I recommend this product

Very happy with these, took the bolts out and they fitted my Brompton pedals by just sliding into the slots.

I recommend this product

Bought these reflectors to fit MKS GR9 Platform Road Pedals. Easily assembled and sit nicely in place leaving the flip pedal 'tongue' clear.

I recommend this product

Easy to fit using narrow nosed pliers (as I didn't have the small sized spanner required). My bike is legal at night again.

I recommend this product

Easy to fit due to the adjustable screw positions and they are not so wide that they are raised above the pedal face like some competitive products

I recommend this product

Just what I wanted pedal reflectors that screw in so they don't pull out when using toe clips. Screwed in easily and fitted well to Shimano M324 pedals.