IRD Wayback Seatpost - Silver - 250 x 27.2mm
£115.99
was
£115.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
NOTE: Published lengths are the length of the SHAFT ONLY. So length to the rails is actually LONGER by around 50mm. This 250mm sizes is actually 300mm from the bottom of the post to the rail cradle on the rocker piece.
A seatpost designed to help enhance seat adjustability on either saddles with very short rails or frames that are a little too small. Allows your saddle to be set back up to 50mm (almost 2 inches). A good seatpost for Brooks Saddles, which have shorter clamping area on its rails.
- Aluminium head and rocker
- Single bolt design
- Tange Prestige CrMo shaft
- 250mm Shaft (300mm Overall)
- Silver
- Weight: Approx 420g
The suggested weight limit on the IRD Wayback seatpost at the max 50mm offset is 115kgs (254lbs).
A seatpost designed to help enhance seat adjustability on either saddles with very short rails or frames that are a little too small. Allows your saddle to be set back up to 50mm (almost 2 inches). A good seatpost for Brooks Saddles, which have shorter clamping area on its rails.
- Aluminium head and rocker
- Single bolt design
- Tange Prestige CrMo shaft
- 250mm Shaft (300mm Overall)
- Silver
- Weight: Approx 420g
The suggested weight limit on the IRD Wayback seatpost at the max 50mm offset is 115kgs (254lbs).
Specification
Downloads
Download File
Questions & Answers (1)
Can this seatpost be used in a set forward orientation?
By Dave
19 Aug 2024
I've got a Thorn Adventure tandem with a Crank Brothers seatpost on the front that is reversed to allow a set forward position. Does the IRD seatpost have enough head angle adjustment to allow it to be used in this way?
SJS Customer Service:
No the post cannot be used in the reverse position. 21/08/24 SK