Ergotec Octopus 2 Adjustable 1 1/8 Inch Quill Stem - 31.8mm Clamp - Black
£39.99
was
Length
£39.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- Stable
- Angle adjustment
- 3D-Forged aluminium ahead stem with 4 screw handlebar clamping
- Adjustable rise
- Clamping Diameter: 31.8mm
- Material: AL 6061 T6
- Fork Clamp: 25.4mm (1 1/8 Inch)
- Quill Length: 180mm
- Angle Adjust: 0 to +50 degrees
- Weight: 400g (60mm) / 440g (90mm) / 450g (110mm)
This product is rated to Humpert’s safety level of 4. This means it is suitable for use on hybrid/trekking bikes that have a combined rider and luggage weight of below 140kg as well as electric bikes (restricted to 25km/h) that have a combined rider and luggage weight of below 120kg.
- Angle adjustment
- 3D-Forged aluminium ahead stem with 4 screw handlebar clamping
- Adjustable rise
- Clamping Diameter: 31.8mm
- Material: AL 6061 T6
- Fork Clamp: 25.4mm (1 1/8 Inch)
- Quill Length: 180mm
- Angle Adjust: 0 to +50 degrees
- Weight: 400g (60mm) / 440g (90mm) / 450g (110mm)
This product is rated to Humpert’s safety level of 4. This means it is suitable for use on hybrid/trekking bikes that have a combined rider and luggage weight of below 140kg as well as electric bikes (restricted to 25km/h) that have a combined rider and luggage weight of below 120kg.
Specification
Downloads
Download File
Questions & Answers (1)
How is the stem angle adjusted?
By Charles Olsen
28 Jun 2022
I've downloaded the assembly instructions from Ergotec but I cannot undo the angle adjust bolt. Not mentioned or labelled in the instructions is the Elastic assist release' on the other side. What does it do?
SJS Customer Service:
Hi Charles,
The adjustment assembly can be quite tight on these stems.
When you undo the retaining bolt the two side plates are released, there is a spring that pushes them both out from the body.
They need to come out far enough to release the locking teeth.
The stem can then be moved to the required angle and the assembly re-tightened.
I have just tried this procedure on a 90mm stem.
The locking bolt was done up very tightly and the two side plates took a bit of fiddling to get them to release.
I took the assembly apart, worked the stem up and down a few times and re-assembled to make it work.
If you believe your stem is faulty please contact our customer service team for a resolution.
Thanks
AK 29/06/22
The adjustment assembly can be quite tight on these stems.
When you undo the retaining bolt the two side plates are released, there is a spring that pushes them both out from the body.
They need to come out far enough to release the locking teeth.
The stem can then be moved to the required angle and the assembly re-tightened.
I have just tried this procedure on a 90mm stem.
The locking bolt was done up very tightly and the two side plates took a bit of fiddling to get them to release.
I took the assembly apart, worked the stem up and down a few times and re-assembled to make it work.
If you believe your stem is faulty please contact our customer service team for a resolution.
Thanks
AK 29/06/22