ATOC Tandem Topper Car Roof Rack - TT-076
£639.99
was
£639.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
The ATOC Tandem Topper is quite simply the best roof bar mounted Tandem Bike Rack you can buy. It's unique pivoting fork mount gives fast, simple, safe and secure mounting of your tandem on the roof of your car. This is easily achieved by one person with minimal effort. No straining, and no risk of damage to your tandem, yourself, or your car. If you've ever battled with a conventional rack on a windy day, you'll know exactly what we mean!
Simply remove the front wheel, raise the forks up to the pivoting fork mounting skewer, secure the forks with the quick release skewer, pick up the back end of your tandem, lift and rotate it onto the rack. Strap down the rear wheel. It couldn't be simpler! Your tandem is fixed safely and securely to your car.
The Tandem Topper is suitable for small cars with short rooflines - only requiring 56cm between roofbars, and as the rail can be easily separated, will easily store in the boot.
- Standard mounting hardware fits Yakima (round) and Thule (rectangular) compatible load bars
- Additional mounting kit available to fit Thule Rapid Aero and OEM bars from VW, Audi, Mercedes, BMW and Mini (see link below)
- Mounts to anywhere on the load bars.
- TT-076 need only 22" load bar spacing - short rooflines are not a problem
- Only 4" wide so you have more room on your bars to carry lots of bikes (or other stuff)
The ATOC Tandem Topper is designed and manufactured in the USA from a bespoke powder coated aluminium extrusion, to give high strength, low weight, perfect funtionality, and good looks. Each part being specifically engineered for its intended use.
- Maximum Wheel Base: 76"
- Minimum Load Bar Spacing: 22"
Simply remove the front wheel, raise the forks up to the pivoting fork mounting skewer, secure the forks with the quick release skewer, pick up the back end of your tandem, lift and rotate it onto the rack. Strap down the rear wheel. It couldn't be simpler! Your tandem is fixed safely and securely to your car.
The Tandem Topper is suitable for small cars with short rooflines - only requiring 56cm between roofbars, and as the rail can be easily separated, will easily store in the boot.
- Standard mounting hardware fits Yakima (round) and Thule (rectangular) compatible load bars
- Additional mounting kit available to fit Thule Rapid Aero and OEM bars from VW, Audi, Mercedes, BMW and Mini (see link below)
- Mounts to anywhere on the load bars.
- TT-076 need only 22" load bar spacing - short rooflines are not a problem
- Only 4" wide so you have more room on your bars to carry lots of bikes (or other stuff)
The ATOC Tandem Topper is designed and manufactured in the USA from a bespoke powder coated aluminium extrusion, to give high strength, low weight, perfect funtionality, and good looks. Each part being specifically engineered for its intended use.
- Maximum Wheel Base: 76"
- Minimum Load Bar Spacing: 22"
Specification
Downloads
Download File
Related products
ATOC Mounting Kit for Top-Slot Style Load Bars - MK-2025-Tpr
£54.99 Inc VAT
Quick view
ATOC Topper Lok Security Skewer
£69.99 Inc VAT
Quick view
Peruzzo Maxle Adaptor - 15 / 20 mm
£29.99 Inc VAT
Quick view
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (11)
Any new information? Thru axel?
By Mark
07 Aug 2021
Hi, does it fit with 12mm thru axle ? Thanks you.
SJS Customer Service:
The manufacture has stated no this will not work with 12mm thu axle, but we suspect with SJS part 54790 you might be able to make this work- but we are yet to test this.
JK 11.08.21
JK 11.08.21
The minimum bar spacing is 22 inches, would 32 inches be ok?
By Jeff
05 Jun 2021
SJS Customer Service:
We would not recommend anything outside the manufactures recommended spacing.
JK 07.06.21
JK 07.06.21
Mudguards
By Simon Tree
31 May 2021
Would this suit a bike fitted with sks mudgaurds?
SJS Customer Service:
Thank you for your enquiry, yes will be fine
WD 01/06/21
WD 01/06/21
Is this suitable for 2.30 width tyres please?
By Brian
08 May 2021
I am looking to use it for a Pedego Tandem weighing 32Kg.
SJS Customer Service:
Thank you for your enquiry, yes should be fine with those tyre widths
WD 105/05/21
WD 105/05/21
Thru axle ?
By Julien
12 Oct 2018
Hi, does it fit with thru axle or only quick release ? Thanks you.
SJS Customer Service:
These are set for QR, you may be able to modify to run a through axle but we have no experience of this.
Thanks - 16/10/18
Thanks - 16/10/18
Could this be used with a 2 wheel Babboe city cargo bike? And what is the weight limit?
By Richard
29 Sep 2018
SJS Customer Service:
Hi there,
Unfortunately as we have never stocked that bike we would have no idea whether it would fit or not im afraid, and unfortunately we do not have a weight limit specified.
Thanks.
Unfortunately as we have never stocked that bike we would have no idea whether it would fit or not im afraid, and unfortunately we do not have a weight limit specified.
Thanks.
Our tyre width is 2.8”. Can the gutters take this?
By Dr Keith Russell
22 Jul 2018
SJS Customer Service:
HI there,
Unfortunately this width of tyre would be too big to fit im afraid.
Thanks.
Unfortunately this width of tyre would be too big to fit im afraid.
Thanks.
Is attachment at only 2 base points: front fork/rear wheel?
By Peter Hopkins
24 Feb 2018
Most (vertical) racks seem to offer some support higher up, such as a clamp onto a frame tube. A tandem is bulky & I'd be concerned about side gusts of wind, if it's secured only at the very bottom (i.e. front axle & base of rear wheel). Even a sharp turn would put a lot of stress on the fastenings).
SJS Customer Service:
Hi there,
The rack fixes to the lower of the rear wheel and the front axle dropouts.
Thanks.
The rack fixes to the lower of the rear wheel and the front axle dropouts.
Thanks.
Is this rack suitable to use with a Hase Pino tandem.
By Ian Purchase
26 Dec 2017
Here is a link to take you to the Hase Pino website. Hopefully this will give you enough information to provide a recommendation about its suitability for the rack.
https://hasebikes.com/95-1-Tandem-PINO-ALLROUND.html
https://hasebikes.com/95-1-Tandem-PINO-ALLROUND.html
SJS Customer Service:
Hi there,
This should work with little trouble, just remove the front wheel and you can mount the bicycle to the rack.
- Maximum Wheel Base: 76" -
Thanks
This should work with little trouble, just remove the front wheel and you can mount the bicycle to the rack.
- Maximum Wheel Base: 76" -
Thanks
Can Tandem Bike With Wheelbase 76,8 Inches Fit Tandem Topper Tt-076?
By Jaroslav Busek
20 Mar 2017
My tandem bike is a little bit longer (76,8 inches) than a manual of Tandem Topper TT-076 allows to carry. Is it possible, that the bike fits the topper? I don't see longer version TT-084 in your e-shop.
SJS Customer Service:
Hi,
As the wheelbase of your tandem exceeds the recommended maximum length we would not recommend fitting it to this carrier. We do stock the longer version that although listed for triplet bikes would be suitable for use with tandems with a longer wheelbase. These are SJSC part number 34497.
Thanks.
As the wheelbase of your tandem exceeds the recommended maximum length we would not recommend fitting it to this carrier. We do stock the longer version that although listed for triplet bikes would be suitable for use with tandems with a longer wheelbase. These are SJSC part number 34497.
Thanks.
Tandem Topper Mounts For Thule Wingbars
By Richard Cliff
12 May 2015
I spoke to you yesterday about this and have now ascertained that the wing bars have a T track system. The specifications say that this rack can be mounted on round or Thule rectangular bars but I had the impression that it could be adapted to mount on T tracks. Can you confirm this before I order.
Thanks
Thanks
SJS Customer Service:
Hi,
We have not heard of anybody adapting these to fit on T tracks, nor is it mentioned anywhere in the instructions. This does not mean its not possible, it just means we have not seen it done so we can't say for sure if it will work or not.
Thanks.
We have not heard of anybody adapting these to fit on T tracks, nor is it mentioned anywhere in the instructions. This does not mean its not possible, it just means we have not seen it done so we can't say for sure if it will work or not.
Thanks.